【摘要】：為了滿足基于機器視覺的復雜零件表面質量在線實時檢測的需求,根據雙遠心成像原理和像差理論基礎,采用ZEMAX光學設計軟件,設計了一款大視場寬景深的雙遠心光學系統。所設計的系統僅由6塊透鏡組成,工作波長在可見光范圍內,系統放大率為-0.061,工作距離大于390mm,最大視場達到180mm。結果表明,光學系統的最大畸變小于0.1%,景深范圍達到80mm,調制傳遞函數在全視場100lp/mm處大于0.4,遠心度最大值控制在0.012°內;各種像差均得到很好的矯正,像質優良。該設計結構符合雙遠心系統的總體設計要求。
[Abstract]:In order to meet the need of on-line real-time detection of surface quality of complex parts based on machine vision, based on the principle of double telecentric imaging and aberration theory, a double telecentric optical system with large field of view and wide depth of field was designed by using ZEMAX optical design software. The designed system consists of only 6 lenses, the operating wavelength is in the visible range, the system magnification is -0.061, the operating distance is more than 390 mm, and the maximum field of view is 180 mm. The results show that the maximum distortion of the optical system is less than 0.1 mm, the depth of field reaches 80 mm, the modulation transfer function is greater than 0.4 at the full field of view 100lp/mm, the maximum of telecentric is controlled within 0.012 擄, and all kinds of aberrations are well corrected and the image quality is good. The design structure meets the general design requirements of the dual telecentric system.
【作者單位】： 桂林電子科技大學智能光機電及先進制造技術研究所;
【基金】：國家自然科學基金資助項目(61265010) 廣西制造系統與先進制造技術重點實驗室基金資助項目(桂科能10-046-07_007)
【分類號】：TP391.41;O439

【相似文獻】

相關期刊論文 前2條

1 吳環寶;王肇圻;傅汝廉;;折/衍混合遠心消色差f-θ物鏡系統設計[J];光子學報;2005年12期

2 ;[J];;年期

相關碩士學位論文 前1條

1 海云飛;遠心光學測量系統的物體邊緣反射模型及其位置檢測方法[D];電子科技大學;2015年

，

本文編號：2269427