本文選題：標度因數 + 補償��； 參考：《中國慣性技術學報》2017年01期

【摘要】：全溫標度因數變化大小直接影響光纖陀螺的應用效果。隨著中高精度光纖陀螺在復雜工況下的廣泛應用,對陀螺標度因數變化的要求也在不斷提高。光纖長度和光纖環平均直徑在全溫范圍內的變化量是全溫標度因數變化最大的影響因素。本文介紹了控制該變化量的常規方式,并提出通過不同排纖方式和不同光纖環窗口比的方法來進一步減小這種變化量的方法。通過仿真和試驗證實:某型中等精度光纖環在不同制作工藝條件下全溫標度因數變化量有將近300×10~(-6)的差值。
[Abstract]:The change of total temperature scale factor directly affects the application effect of fiber optic gyroscope (fog). With the wide application of fiber-optic gyroscope (fog) with medium and high precision in complex working conditions, the demand for the change of scale factor of fog is also increasing. The variation of fiber length and the average diameter of fiber ring in the whole temperature range is the most important factor affecting the change of the total temperature scaling factor. This paper introduces the conventional ways of controlling this variation, and puts forward a method to further reduce the variation by using different fiber arrangement and different window ratio of fiber loop. The results of simulation and experiments show that the variation of the total temperature scaling factor of a fiber ring with medium accuracy is nearly 300 脳 10 ~ (-6) under different fabrication conditions.
【作者單位】： 天津航海儀器研究所;
【基金】：國防預研項目(51309010102)
【分類號】：TN253;TN96

【相似文獻】

相關期刊論文 前2條

1 張燕萍;潘子軍;魏志武;徐瑞鋒;吉世濤;;光纖陀螺標度因數溫度補償硬件實現[J];中國慣性技術學報;2013年05期

2 ;[J];;年期

相關碩士學位論文 前1條

1 馬莉;旋轉加速度計重力梯度儀標度因數調整算法與仿真研究[D];東南大學;2016年

，

本文編號：1909698