本文選題：激光著色技術 + 納秒脈沖激光��； 參考：《應用激光》2017年04期

【摘要】：利用納秒級脈沖激光對304不銹鋼表面進行著色試驗,建立激光作用于金屬表面的熱作用模型,利用EDAX分析著色不銹鋼表面金屬元素質量比變化,探究激光熱作用對304不銹鋼表面著色效果的影響及不同熱作用過程下的金屬表面氧化的規律。結果表明:納秒激光金屬彩色著色過程中存在"激光脈沖直接作用過程"和"激光脈沖擴散熱作用過程"兩個不同機制的熱作用過程。在快速加熱和快速冷卻的"激光脈沖直接作用過程"中不銹鋼表面更容易產生Cr氧化物;在以擴散熱為主導的"激光脈沖擴散熱作用過程"中不銹鋼表面更容易產生Fe氧化物。
[Abstract]:The surface of 304 stainless steel was colored by nanosecond pulsed laser. The thermal action model of laser on the surface of stainless steel was established. The variation of the mass ratio of metal elements on the surface of stainless steel was analyzed by EDAX. The effect of laser thermal action on surface coloring of 304 stainless steel and the rules of metal surface oxidation under different thermal action were investigated. The results show that there are two different mechanisms in the coloring process of nanosecond laser metal: "direct action process of laser pulse" and "thermal process of laser pulse diffusion". In the "laser pulse direct action process" of rapid heating and cooling, Cr oxide is more easily produced on the stainless steel surface, and Fe oxide is more easily produced on the stainless steel surface in the "laser pulse diffusion thermal process", which is dominated by the diffusion heat.
【作者單位】： 華南師范大學廣州市特種光纖光子器件與應用重點實驗室;華南師范大學廣東省微納光子功能材料與器件重點實驗室;
【基金】：廣東省科技資助項目(項目編號:2014B010131004,2014B010124002,2014B090903014,2015B090920003,2016B090917002,2016B090926004) 廣東省自然科學基金資助項目(項目編號:2016A030313456) 國家重點研發計劃資助項目(項目編號:2017YFB1104500)
【分類號】：TN249

【相似文獻】

相關期刊論文 前1條

1 閆仕農,陸建,倪曉武;CO_2激光與牙齒硬組織熱作用的數值模擬[J];光電子·激光;1999年06期

，

本文編號：1869831