本文選題：激光沖擊強化設備　切入點：激光器　出處：《光電工程》2017年07期 　論文類型：期刊論文

【摘要】：針對目前國內激光沖擊強化設備工業(yè)化程度不高的問題,采用固定光路系統結構形式和模塊化設計方法,研制了一款激光沖擊強化設備。分析了激光沖擊強化設備的設計方案、激光光路布置特點以及系統控制方法,并對激光沖擊強化設備技術指標進行了測試。保持室溫在(22±2)℃以內,設備開機20 min后,輸出最大脈沖能量可達25 J,能量波動范圍不超過3%,脈寬在16 ns?20 ns之間連續(xù)可調,波動范圍在-1 ns?1 ns以內,光束的發(fā)散角小于2.5 mrad,光束指向波動小于50μrad,重復頻率0.5 Hz?5 Hz可調,光路系統的傳輸效率約為92%,約束層厚度均勻、且流量連續(xù)可控。測試結果表明,激光沖擊強化設備的各項性能良好。
[Abstract]:Aiming at the problem that the industrialization of laser shock strengthening equipment is not high at present, a laser impact strengthening equipment is developed by adopting the structure form of fixed optical path system and modularization design method, and the design scheme of laser impact strengthening equipment is analyzed. The characteristics of laser light path arrangement and system control method are also tested. The technical specifications of laser shock strengthening equipment are tested. The laser beam is kept within 22 鹵2 鈩，

本文編號：1589413