本文選題：移動通信 + 虛擬實驗��； 參考：《東華大學》2014年碩士論文

【摘要】：實驗是專業課教學中非常重要的環節,是學生將理論知識與實際相結合的實踐。但隨著近年高校學生人數的增加,有限的實驗資源無法滿足實際教學的需求。為了解決該難題,本課題組開發了基于B/S模式的在線計算機網絡虛擬實驗室系統；目前,該實驗系統已經建設完成并已投入使用。為了讓該虛擬實驗室系統的實驗服務擴展至通信課程,本人研究了基于3Ds max和Virtools技術的虛擬實驗開發方法,并參照《移動通信實驗與實訓》教材,開發了一套移動通信虛擬實驗,本文詳細闡述了該虛擬實驗系統的開發過程。 文中首先介紹了虛擬實驗的背景,分析了國內外的發展情況,闡述了該課題的意義。接著,深入研究了三維虛擬實驗開發技術,并通過比較若干種建模技術和交互技術給出了選擇3Ds Max和Virtools作為開發工具的理由。然后從第三章開始介紹課題的設計內容,包括：(一)實驗需求和設計原則、系統的B／S體系結構、虛擬實驗的場景模型和功能、實驗的操作流程及開發流程等。(二)在遵循建模準則的前提下,以CDMA測試板建模過程為重點對象,對三維虛擬實驗場景和實驗器材的建模以及模型“合并”和導出3Ds max的過程等進行了詳細的描述。(三)詳細地介紹了本系統交互部分的設計和開發過程,包括二維操作界面的搭建、三維漫游、設備展示、設備轉載、設備連線、通信過程、實驗計時、實驗評分、實驗數據保存等。最后,對實驗的初始化和發布進行了說明。 論文的結尾部分對本畢業設計的主要工作進行了總結,并結合實驗室發展趨勢和尚待解決的問題對課題提出了幾點探討。
[Abstract]:Experiment is a very important link in the teaching of specialized courses, and it is a practice for students to combine theoretical knowledge with practice. However, with the increasing number of college students in recent years, limited experimental resources can not meet the needs of practical teaching. In order to solve this problem, our team has developed an online computer network virtual laboratory system based on B / S model, which has been completed and put into use. In order to extend the experiment service of the virtual laboratory system to the communication course, I studied the development method of virtual experiment based on 3Ds max and Virtools technology, and referred to the teaching material of Mobile Communication experiment and practice training. A set of virtual experiment of mobile communication is developed, and the development process of the virtual experiment system is described in detail in this paper. In this paper, the background of virtual experiment is introduced, the development situation at home and abroad is analyzed, and the significance of this subject is expounded. Then, the development technology of 3D virtual experiment is deeply studied, and the reasons for choosing 3Ds Max and Virtools as development tools are given by comparing several modeling techniques and interactive technologies. Then it introduces the design content of the subject from the third chapter, including the requirement and design principle of the experiment, the B / S architecture of the system, the scene model and function of the virtual experiment, the operation flow and development flow of the experiment, etc. (2) taking the modeling process of CDMA test board as the key object, the modeling of 3D virtual experimental scene and experimental equipment, the process of model merging and the process of deriving 3Ds max are described in detail under the premise of following the modeling criteria. (3) the design and development process of the interactive part of the system is introduced in detail, including the construction of two-dimensional operation interface, 3D roaming, equipment display, equipment reprinting, equipment connection, communication process, experimental timing, experimental score. Preservation of experimental data, etc. Finally, the initialization and release of the experiment are explained. At the end of the thesis, the main work of the graduation project is summarized, and some problems that need to be solved in the laboratory are discussed.
【學位授予單位】：東華大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TN929.5

【參考文獻】

相關期刊論文 前6條

1 李永帥;陳清奎;宋開功;付同慶;;基于Virtools的虛擬實驗室的構建方法研究[J];機電產品開發與創新;2011年02期

2 趙沁平;郝愛民;王莉莉;何兵;;實時三維圖形平臺BH_GRAPH[J];計算機研究與發展;2006年09期

3 楊錕,劉繼紅;面向虛擬裝配的裝配建模技術[J];機械科學與技術;2001年02期

4 方利偉;;基于Virtools的三維虛擬實驗室研究與實現[J];實驗技術與管理;2010年05期

5 潘麗華,陶洪;淺談新課程中科學探究的價值與反思[J];物理教師;2002年12期

6 張曉梅;;論高校圖書館的虛擬館藏建設[J];醫學信息學雜志;2007年05期

，

本文編號：1892755