發布時間：2018-04-10 17:41

  本文選題：穩相電纜組件 + 介電常數　； 參考：《南京理工大學》2014年碩士論文

【摘要】：隨著微波通信系統的快速發展、計算機運算速度的提高和基礎工業技術的發展,相控陣技術優勢凸顯。比如軍事方面的相控陣?yán)走_(dá),民用領域新一代無線通信中的電調天線。在這些相控陣技術的應用中饋線承擔著電掃描、多波束、副瓣電平控制等功能。這些微波組件對提高射頻信號傳輸質量,提升整機系統信號傳輸、簡化整機結構意義重大,同時對饋線的信號傳輸質量多了幅相一致性和相位穩定性的要求,射頻穩相電纜技術也就應運而生。就射頻電纜組件來說,要面臨已然不是連接器和電纜的簡單選型及其裝配的問題,更是低駐波比、低損耗、穩相等方面的挑戰。射頻穩相電纜組件在開發過程中存在許多問題：穩相連接器和穩相電纜測設計或選型,及其匹配。本文針對這些問題,根據傳輸線理論,提出一個系統的開發方案。重點研究一下三個部分的主要內容：1、射頻穩相電纜組件的組成。闡述射頻穩相電纜組件在系統中的功能,并從微波傳輸線理論出發,根據系統對此射頻穩相電纜組件的參數要求,謹慎選取射頻穩相連接器和穩相電纜。2、穩相電纜組件裝配工藝。根據穩相連接器的結構和穩相電纜的特點,在組件裝配時選擇適當?shù)墓に嚪椒ā⒕珳?zhǔn)的工藝參數。3.射頻穩相電纜組件裝配過程中的相位控制�；谝陨纤械难芯拷Y(jié)果,針對射頻穩相電纜組件在裝配過程中的種種問題,給出了解決方案,并展望了今后的發展方向。
[Abstract]:With the rapid development of microwave communication system development, improve the computing speed and the foundation of the industrial technology, highlighting the advantages of phased array technology. For example, the military aspects of the phased array radar, electrically adjustable antenna fields a new generation of wireless communication. In the phased array technology used in feeder undertakes electrical scanning, multi beam, side lobe the level control functions. The microwave module to improve the RF signal transmission quality, improve the signal transmission system, simplify the structure of great significance, at the same time, the quality of signal transmission on feeder more amplitude phase consistency and phase stability requirements, RF cable technology came into being. RF cable assembly, simple face the selection and assembly problem is already not the connectors and cables, is low in Bobbi, low loss, stable equal challenges. The RF cable assembly in the open There are many problems in the process of development: stationary phase and stationary phase measuring cable connector design or selection and matching. Aiming at these problems, according to the transmission line theory, put forward the development scheme of a system. It focuses on the main contents of three parts: 1, RF cable assembly. This function of RF cable components in the system, and based on the theory of microwave transmission line, according to the requirements of this system parameters of RF cable assemblies, careful selection of RF connector and cable stationary phase.2, phase stable cable assembly process. According to the characteristics of structure and stability of stationary phase phase cable connector, appropriate technology the choice in the assembly, the phase parameters of.3. RF precise phase stable cable assembly process control. All of the above research results based on the RF cable assembly in the assembly process The problems and solutions are given, and the future development direction.

【學位授予單位】：南京理工大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TN92

【參考文獻】

相關期刊論文 前1條

1 陳峰;;射頻微波電纜測試方法[J];國外電子測量技術;2011年08期

，

本文編號：1732256