發布時間：2018-07-28 10:48

【摘要】：為探求不同導葉參數對混流泵水力性能的影響,以比轉速為438的模型泵為研究對象,在模型試驗驗證的基礎上,采用計算流體動力學方法,以常規導葉設計為基礎,在保持其他參數不變的情況下,分別數值模擬計算了4種不同導葉葉片數方案和7種不同導葉片掃掠角度方案的混流泵段水力性能。數值模擬結果表明:改變導葉葉片數對混流泵段外特性影響明顯,不同流量下存在不同的最優葉片數,小流量工況運行時,應適當增加葉片數,大流量工況運行時,應適當減少葉片數;不同導葉片掃掠角度對大流量區域影響顯著,不同流量存在不同的最優導葉片掃掠角度且隨著流量的增大從-16°逐漸偏向+24°;在流量為510 L/s時,計算掃掠角度范圍內對效率的影響達5.5%。
[Abstract]:In order to find out the influence of different guide blade parameters on the hydraulic performance of the mixed flow pump, the model pump with a specific speed of 438 is studied. On the basis of the model test verification, the computational fluid dynamics method is applied to the conventional guide blade design and the number of 4 different guide vane numbers is numerically simulated under the condition of keeping the other parameters constant. The scheme and the hydraulic performance of the mixed flow pump section of 7 different guide vane sweeping angle schemes are presented. The numerical simulation results show that the change of the number of guide vane has an obvious influence on the outer characteristics of the mixed flow pump, and there are different optimal number of blades under different flow rates. The number of blades should be increased properly when the small flow condition runs, and the blade should be appropriately reduced when the large flow condition is running. The sweep angle of different guide vane has a significant influence on the large flow area, and the different flow rates have different optimal blade sweep angles and gradually change from -16 degrees to +24 degrees with the increase of the flow rate; the effect of the calculation on the efficiency of the swept angle range is 5.5%. when the flow rate is 510 L/s.
【作者單位】： 揚州大學水利與能源動力工程學院;
【基金】：國家自然科學基金(51376155) “十二五”農村領域科技計劃(2012BAD08B03-2) 江蘇高校優勢學科建設工程(PAPD)
【分類號】：TV136.2

【相似文獻】

相關期刊論文 前5條

1 韓國其;劉大愷;;軸流泵后導葉幾何參數的試驗研究[J];河海大學學報;1989年01期

2 胡健;黃勝;王培生;;加導葉軸流泵水動力特性研究[J];水力發電學報;2008年01期

3 肖玉紅;;混流式水輪機蝸殼·導葉及轉輪內部水流的二維與三維數值模擬比較分析[J];安徽農業科學;2011年28期

4 羅欣;鄭源;馮俊;;基于CFD的軸流泵后置導葉水力性能分析[J];水電能源科學;2014年03期

5 樊紅剛;崔赫辰;陳乃祥;;導葉關閉規律非線性評價函數及多工況優化[J];排灌機械工程學報;2013年03期

相關碩士學位論文 前3條

1 涂戀戀;后導葉片葉掃掠對軸流泵性能的影響[D];揚州大學;2016年

2 楊小妮;運動導葉在不同長度時的旋流特性研究[D];太原理工大學;2014年

3 劉殿興;低比轉速混流式水泵水輪機非同步導葉流動穩定性研究[D];蘭州理工大學;2013年

，

本文編號：2149856