帶支錨環梁基坑支護體系有限元模擬及受力分析
[Abstract]:In the deep foundation pit supporting structure, the ring beam support structure has been widely used in practical engineering because of its large stiffness, good mechanical performance and convenient construction because of the formation of space rigid frame. Scholars at home and abroad have also done a lot of research on ring beam support. Although the design and calculation method of ring beam support structure is not perfect at present, the basic mechanical characteristics and working characteristics of ring beam support structure have been basically understood. The existing theories can guide the application of practical engineering. In recent years, though there have been some engineering examples for the ring beam supporting structure with supported anchors, it is lack of deep research and its working performance is not clear. According to the engineering example of deep foundation pit with bolted ring beam support structure at present, combined with the domestic and foreign research results in this field, In this paper, the mechanical properties of ring beam supporting structure with supported anchor are studied by using the finite element analysis software MIDAS-GTS. The main work is as follows: 1. The current research and application of ring beam supporting structure at home and abroad and the main calculation methods are summarized. The advantages and disadvantages of various methods and the existing problems are analyzed. 2. The finite element theory, stress and strain theory of soil mechanics, strength criterion of soil, elastic-plastic constitutive model, finite element analysis software MIDAS-GTS and Lizheng deep foundation pit software are introduced. 3. The three-dimensional finite element model of a foundation pit is established by MIDAS-GTS. The soil mass, retaining pile, bracing and prestressed anchor cable are considered as a three-dimensional space body in the analysis, and the characteristics of internal force and deformation of braced bolted ring beam supporting structure are analyzed. In addition, the influence of prestressing force, stiffness and position of anchor cable on the stress and displacement of ring beam supporting structure is analyzed and compared. 4. MIDAS-GTS is used to build the whole space finite element model of a project example to carry on the design calculation, the result is compared with the calculation result of the deep foundation pit of Lizheng, and the difference between the two calculation results is analyzed for the reference of the similar engineering in the future.
【學位授予單位】:華南理工大學
【學位級別】:碩士
【學位授予年份】:2013
【分類號】:TU470
【參考文獻】
相關期刊論文 前10條
1 曾律弦;潘泓;肖四喜;;深基坑環梁支護結構的性狀分析[J];四川建筑科學研究;2009年03期
2 倪紅梅;徐新輝;;等值梁法在樁墻式支護結構中的應用[J];平頂山工學院學報;2009年02期
3 李彥初;陳輪;;深基坑復合土釘支護的三維有限元數值分析[J];工程勘察;2012年02期
4 高文華,楊林德;軟土深基坑圍護結構變形的三維有限元分析[J];工程力學;2000年02期
5 胡孔國,吳京,宋啟根;深基坑開挖和支護全過程分析的彈塑性有限元法[J];建筑結構;1999年03期
6 郭玉榮,王兆軍,鄒銀生;基坑支護結構的非線性土抗力分析法[J];建筑結構;2001年10期
7 王盼;陳健;;上部土釘與下部排樁組合支護結構的力學性狀分析[J];水運工程;2010年10期
8 陸培毅;余建星;肖健;;深基坑回彈的空間性狀研究[J];天津大學學報;2006年03期
9 羅蜀青;深基坑大直徑圓環梁水平支撐體系的優化設計與工程實踐[J];探礦工程(巖土鉆掘工程);2004年11期
10 劉國彬,黃院雄,侯學淵;基坑回彈的實用計算法[J];土木工程學報;2000年04期
相關博士學位論文 前1條
1 鄧子勝;深基坑支護結構—土空間非線性共同作用研究[D];湖南大學;2004年
相關碩士學位論文 前7條
1 陳雨蒙;大型基坑環梁支護體系有限元數值模擬分析[D];西南交通大學;2011年
2 孫良濤;大直徑雙環梁支護體系受力性能分析與三維有限元模擬[D];天津大學;2005年
3 郭躍;深大基坑三維全過程計算理論與應用研究[D];浙江大學;2006年
4 劉建偉;樁錨與土釘聯合支護結構土壓力分配機制研究[D];鄭州大學;2006年
5 黃憑;帶豎向錨索雙排樁支護結構的研究與分析[D];華南理工大學;2010年
6 李娟娟;內撐式條形深基坑支護結構的優化研究[D];西南交通大學;2012年
7 何波;江洲中深基坑施工受力變形規律及內支撐優化方案研究[D];中南大學;2012年
,本文編號:2416194
本文鏈接:http://sikaile.net/kejilunwen/sgjslw/2416194.html