【摘要】：電梯作為人們?nèi)粘Ｉ钪幸环N的垂直交通工具,與人們的生活息息相關,在高層建筑日益增多的今天,電梯的使用變得更加頻繁。而近年來電梯事故頻頻,于是電梯的安全監控成為電梯行業的重中之重,對電梯的監控管理研究也成為一項重要課題。 本課題在目前遠程電梯監控技術的基礎上,結合了目前已經比較完善的GPRS網絡技術,使GPRS網絡作為傳輸信息的媒介,從電梯采集來的數據通過GPRS網絡傳送到數據監控中心或者接收來自監控中心的命令。系統主要由三大部分構成,電梯數據的采集終端、數據傳輸模塊和數據監控中心。數據采集終端將電梯的各項數據信息采集后發送到數據傳輸模塊,單片機對數據進行分析處理后通過GPRS模塊發送出去,數據中心接收到數據后分析處理,并且顯示在界面上方便用戶隨時監控。數據傳輸?shù)牧鞒淌菙?shù)據通過CAN總線傳輸?shù)綌?shù)據采集模塊,采集模塊接收CAN數據后轉換處理,通過單片機的串口將數據傳送到GPRS傳輸模塊,傳輸模塊通過發送特定指令給GPRS模塊,使模塊接收數據,連接網絡后將數據傳送出去。 本論文內容包括系統的總體方案設計、數據采集模塊與GPRS傳輸模塊的硬件電路設計及軟件設計、數據監控中心管理軟件研究和測試,詳細介紹了電梯監控系統整個研究設計的過程。
[Abstract]:As a vertical vehicle in people's daily life, elevators are closely related to people's lives. Nowadays, the use of elevators is becoming more and more frequent with the increasing number of high-rise buildings. In recent years, the elevator accidents frequently, so the elevator safety monitoring has become the most important part of the elevator industry, the elevator monitoring and management research has become an important topic. On the basis of the remote elevator monitoring technology, this paper combines the GPRS network technology, which is already perfect at present, to make the GPRS network as the medium for transmitting information. Data collected from elevators are transmitted via the GPRS network to or received orders from the data monitoring center. The system is mainly composed of three parts, elevator data acquisition terminal, data transmission module and data monitoring center. The data acquisition terminal sends the elevator data information to the data transmission module, the single chip microcomputer analyzes the data and sends it out through the GPRS module, and the data center receives the data after analyzing and processing. And display on the interface to facilitate user monitoring at any time. The flow of data transmission is that the data is transmitted to the data acquisition module through the CAN bus, the acquisition module receives the CAN data after conversion processing, the data is transmitted to the GPRS transmission module through the serial port of the single chip microcomputer, and the transmission module sends specific instructions to the GPRS module. Make the module receive data, connect to the network and send the data out. The content of this paper includes the overall scheme design of the system, the hardware circuit design and software design of data acquisition module and GPRS transmission module, the research and test of data monitoring center management software. The whole research and design process of elevator monitoring system is introduced in detail.
【學位授予單位】：南京理工大學
【學位級別】：碩士
【學位授予年份】：2013
【分類號】：TU857;TP277

【參考文獻】

相關期刊論文 前10條

1 葉安麗,李惠升;電梯遠程監控系統[J];北京建筑工程學院學報;2000年04期

2 黃玉蘭;劉靜;王洪革;李志軍;;基于AT指令集的GPRS智能通信系統[J];吉林大學學報(信息科學版);2009年04期

3 丁暉;;GPRS技術在電力SCADA系統中的應用研究[J];電測與儀表;2007年08期

4 王發賢;邵建軍;柴欣;;電梯監控產品技術應用分析[J];裝備制造技術;2012年12期

5 李育賢;;基于IP技術的智能監控系統研究[J];計算機科學;2008年07期

6 王奎,張鋼,張連芳;基于Linux的嵌入式PPP實現[J];計算機應用研究;2002年11期

7 宗群,王宇波,李愛國;CAN總線在電梯遠程監控系統中的應用[J];制造業自動化;2004年07期

8 庚偉;房祥雨;;淺談電梯遠程監控系統[J];科技風;2012年04期

9 程峰;;電梯遠程監控技術及其發展[J];科技信息;2010年18期

10 韓加宏;;基于GPRS技術煤礦安全監測數據遠程傳輸系統的研究[J];煤;2007年09期

相關碩士學位論文 前2條

1 劉安厚;基于GPRS的電梯遠程監控系統[D];重慶大學;2009年

2 王振起;基于單片機和GPRS數據傳輸技術的研究[D];哈爾濱理工大學;2009年

，

本文編號：2235441