【摘要】：分布式冷熱電聯供系統作為一種新的供能方式,因其既能滿足終端用戶需求,又避免了傳輸損耗,近年來得到蓬勃發展,而與其配套的運行監控與優化管理系統也處在不斷的迭代更新中。作為冷熱電聯供系統與用戶交互的平臺,傳統的運行監控系統因其固有模式限制,在實現系統智能化、差異化、提高系統能源利用率方面顯得捉襟見肘。因此開發一套通用性強,既結合傳統運行監控安全、穩定的特點,又能兼顧優化管理需求的新型運行監控與優化管理系統十分具有應用價值。本文即以此為背景,結合實際冷熱電聯供工程項目展開對運行監控與優化管理系統的設計開發。首先,本文在充分調研的基礎上,分析了傳統冷熱電聯供運行監控與優化管理系統的不足,并結合本項目需求提出了集中化、通用化、實時化、遠程化、智能化的“五化”要求。其次,結合本項目需求提出了一套系統架構,并對各模塊進行了性能闡述和分析。根據系統架構,結合項目實際需求以及試驗基地的現有設備條件,本文設計并實現了系統的環境監控模塊、安防監控模塊、設備監控模塊及系統報警模塊五部分。再次,根據系統架構及項目對運行監控與優化管理系統智能化的需求,本文設計實現了優化管理子系統。優化管理系統實現了對多平臺的整合,包括以O(shè)PC技術為基礎實現數據通信、SQL Server數據庫技術實現數據存儲以及調用MATLAB模塊實現優化管理。最后,將運行監控與優化管理系統部署并測試。系統的部署與測試過程結合了實驗室搭建的混合仿真平臺,在測試的過程中不斷地對系統改進完善,并將3D虛擬現實技術與監控系統有機的結合起來,搭建了試驗基地的3D模型。經實際運行測試,本文設計并實現的運行監控與優化管理系統高效、切實可行。
[Abstract]:As a new way of energy supply, distributed cold-heat combined power supply system has been developed vigorously in recent years because it can not only meet the demand of end-users, but also avoid transmission loss. And its supporting operation monitoring and optimization management system is also in the continuous iterative update. As a platform for the interaction between the cold-hot power supply system and the users, the traditional operation monitoring system, because of its inherent mode limitation, is insufficient in realizing the intelligence and differentiation of the system and improving the energy utilization efficiency of the system. Therefore, it is of great value to develop a new type of operation monitoring and optimization management system, which combines the characteristics of safety and stability of traditional operation monitoring and control, and also takes into account the requirements of optimal management. Based on this background, the design and development of the operation monitoring and optimization management system is carried out in combination with the actual cold-heat power supply project. First of all, on the basis of full investigation, this paper analyzes the shortcomings of the traditional monitoring and optimization management system, and puts forward the centralized, universal, real-time and remote management system based on the requirements of the project. Intelligent "five" requirements. Secondly, according to the requirements of the project, a set of system architecture is put forward, and the performance of each module is described and analyzed. According to the system architecture, combined with the actual requirements of the project and the existing equipment conditions of the test base, this paper designs and implements five parts of the system: environment monitoring module, security monitoring module, equipment monitoring module and system alarm module. Thirdly, according to the system architecture and the requirement of intelligent operation monitoring and optimization management system, this paper designs and implements the optimization management subsystem. The optimization management system realizes the integration of multi-platform, including data communication based on OPC technology, SQL Server database technology to achieve data storage, and call MATLAB module to achieve optimal management. Finally, the running monitoring and optimization management system will be deployed and tested. The deployment and testing process of the system is combined with the mixed simulation platform built by the laboratory. In the process of testing, the system is constantly improved and perfected, and the 3D virtual reality technology is combined with the monitoring system organically. A 3D model of the test base is built. Through the actual operation test, the design and implementation of the operation monitoring and optimization management system is efficient and feasible.
【學位授予單位】：山東大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：TP311.52;TP277

【參考文獻】

相關期刊論文 前10條

1 李帥華;彭鋼;楊春來;袁曉磊;;OPC通信技術在DCS智能校驗系統開發中的應用[J];河北電力技術;2015年04期

2 張水生;;淺談大數據時代下的數據可視化制作工具[J];藝術科技;2015年05期

3 李文峰;;基于遺傳算法的電力系統無功優化[J];電氣開關;2014年04期

4 范晶;;在VC環境中使用OPC與PLC進行通訊[J];廣播電視信息;2014年02期

5 唐正艷;王勛;李誠;;冷熱電聯產(CCHP)技術的研究[J];綠色建筑;2012年06期

6 任麗霞;;淺談機房環境綜合監測系統的應用[J];科技創新與應用;2012年30期

7 李建峰;;淺談OPC應用[J];黑龍江科技信息;2012年26期

8 張勤;;天然氣分布式能源的現狀與問題[J];大眾科技;2012年07期

9 劉敏;;KEPServer在PLC和VB.NET通訊中的應用[J];大眾科技;2012年07期

10 郭守漢;;網絡數據庫選擇參考[J];統計與管理;2012年02期

相關碩士學位論文 前10條

1 閆菲;基于OPC服務器的虛擬DCS標準通信接口研究及開發[D];華北電力大學;2014年

2 望荊沙;基于OPC DA 3.0的OPC服務器與客戶端的研究與實現[D];西安電子科技大學;2012年

3 王志敏;天津新能源公司分布式能源建設項目的可行性分析[D];東北大學;2011年

4 馮爽;基于異構數據教材管理系統的設計與實現[D];河北科技大學;2010年

5 涂湘明;基于Internet的牛馬司煤礦遠程監測系統設計與實現[D];電子科技大學;2010年

6 王志會;基于OPC規范的MOCVD控制系統軟件優化設計[D];西安電子科技大學;2010年

7 孫義欣;改進遺傳算法及其在發電企業成本分析中的應用[D];山東師范大學;2009年

8 李彥秋;面向數據庫外層的安全技術研究[D];中國石油大學;2009年

9 黃明峰;基于OPC技術的軌道交通車站監控系統的研究和實現[D];上海交通大學;2009年

10 彭登峰;基于OPC XML-DA的工業現場總線數據訪問技術研究[D];天津理工大學;2009年

，

本文編號：2433718