【摘要】：針對現有牙頜有限元建模方法存在低效和缺乏個性化的缺點,提出一種參數化的牙頜有限元自動建模方法。通過實體造型技術對牙頜初始三維幾何模型進行處理,生成牙周膜、牙槽的三維幾何模型;根據齒列的配置參數和單元參數對牙頜模型進行網格劃分;基于Ansys的參數化程序設計語言,開發了面向牙頜的有限元自動建模系統,并在真實的牙頜數據集上進行了建模實驗。實驗結果表明該系統能自動高效地生成個性化牙頜系統的有限元模型。
[Abstract]:In view of the shortcomings of the existing finite element modeling methods for dentistry and jaw, a parameterized finite element modeling method for dentistry and jaw is presented in this paper. The 3D geometric model of periodontal membrane and alveolar is generated by processing the initial 3D geometric model of the tooth by solid modeling technology, and the mesh of the model is divided according to the configuration parameters and unit parameters of the tooth column. Based on the parameterized programming language of Ansys, an automatic finite element modeling system for dental jaw was developed, and the modeling experiment was carried out on the real dental data set. The experimental results show that the system can automatically and efficiently generate the finite element model of the personalized dental and maxillary system.
【作者單位】： 武夷學院數學與計算機學院;認知計算與智能信息處理福建省高校重點實驗室;中國科學院計算技術研究所前瞻研究實驗室;
【基金】：國家自然科學基金(61173067,61379085) 國家863計劃(2015AA016401) 武夷學院科技項目(YJ201607)
【分類號】：R78;TP391.9
，

本文編號：2251767