本文選題：批處理機 + 運輸��； 參考：《控制與決策》2017年06期

【摘要】：針對煉鋼模鑄系統鋼錠高溫運作的特點,提出帶有傳擱時間約束的生產前運輸與批處理機生產協調的調度問題.工件的加工時間依賴于其傳擱時間,每批工件的加工時間為該批工件中加工時間最大值.目標函數為最小化總完工時間與生產費用的線性組合.通過復雜性分析,證明該問題是強NP難解問題.建立混合整數規劃模型,基于動態規劃提出兩種特殊情況的最優算法,設計原問題的啟發式算法并進行最壞情況下性能比分析.實驗仿真結果驗證了所提出啟發式算法的有效性與穩定性.
[Abstract]:In view of the characteristics of high temperature operation of ingot in steelmaking die casting system, a scheduling problem of coordination between pre-production transportation and batch production with transfer time constraint is proposed. The processing time of the workpiece depends on its transfer time, and the processing time of each batch of workpiece is the maximum. The objective function is to minimize the linear combination of total completion time and production cost. Through complexity analysis, it is proved that this problem is a strong NP-hard problem. The mixed integer programming model is established and two special case optimal algorithms are proposed based on dynamic programming. The heuristic algorithm of the original problem is designed and the performance ratio is analyzed in the worst case. Experimental results show that the proposed heuristic algorithm is effective and stable.
【作者單位】： 沈陽理工大學理學院;
【基金】：國家自然科學基金項目(71101097) 遼寧省“百千萬人才工程”培養項目(2014921043) 遼寧省高等學校優秀人才支持計劃項目(LR2015056) 遼寧省先進制造技術與裝備重點實驗室開放基金課題(4771004kfs28)
【分類號】：TF758;TP301.6

【相似文獻】

相關期刊論文 前4條

1 張雪峰,張軍,徐廣堯;縮短小掛板鋼錠傳擱時間研究[J];兵器材料科學與工程;1997年04期

2 曹長吉;;鋼錠傳擱過程熱量變化的定量分析[J];鋼鐵;1993年02期

3 蔣楊虎，肖坤偉，肖世華，丁懷林，，聶毅沉;D8908、D8413鋼錠冷凝過程研究及傳擱時間表的制訂[J];武鋼技術;1994年03期

4 ;[J];;年期

相關重要報紙文章 前1條

1 全國冶金節能減排新技術知識競賽組委會專家組;消除影響連鑄坯熱送熱裝效果的不利因素[N];中國冶金報;2009年

本文編號：1999654