本文選題：切割路徑優化 + 嵌套識別��； 參考：《計算機輔助設計與圖形學學報》2017年11期

【摘要】：為解決在平面圖形切割領域中采用不同的切割順序以及切割起止點導致切割路徑空行程相差甚遠的問題,提出一種包含多重嵌套封閉環的平面切割路徑優化算法.首先提出一種多重嵌套封閉環識別子算法,并以四向鏈表節點為基礎構建包含多重嵌套封閉環的平面切割路徑模型;然后考慮各封閉環的幾何特征以及彼此之間的關系,將切割路徑優化問題轉化為多個關聯的動態旅行商問題組合;最后通過逐層多次調用禁忌貪婪算法對切割路徑進行優化求解,在優化中同時考慮封閉環之間的切割順序及各封閉環切割起止點的選擇.仿真實驗結果表明,該算法對包含多重嵌套封閉環的平面切割路徑建模和優化是可行和有效的.
[Abstract]:In order to solve the problem that different cutting sequences and cutting starting and ending points are used in the field of planar graphic cutting, a new algorithm of planar cutting path optimization is proposed, which includes multiple nested closed rings. Firstly, a multi-nested closed loop recognition algorithm is proposed, and a planar cutting path model with multiple nested closed rings is constructed on the basis of four-direction linked list nodes, and then the geometric characteristics of each closed ring and the relationship between each other are considered. The cutting path optimization problem is transformed into multiple interrelated dynamic traveling salesman problems. Finally, the cutting path is optimized by using Tabu greedy algorithm layer by layer. In the optimization, the cutting sequence between the closed rings and the choice of the starting and ending points of the closed rings are taken into account. The simulation results show that the algorithm is feasible and effective for the modeling and optimization of planar cutting paths with multiple nested closed rings.
【作者單位】： 廣東工業大學機電工程學院;佛山博文機器人自動化科技有限公司;河源鵬翔超高壓水切割機械有限公司;
【基金】：廣東省應用型科技研發專項資金(2015B090922003) 廣東省前沿與關鍵技術創新專項資金(2016B090911002) 佛山市科技創新團隊項目(2015IT100072)
【分類號】：TP301.6

【相似文獻】

相關期刊論文 前8條

1 徐知行,叢文龍,唐可洪;計算機輔助選擇裝配方法[J];吉林大學學報(工學版);2005年06期

2 王世華;楊建梅;;求解社區項目博弈的一種改進貪婪算法研究[J];數學的實踐與認識;2014年05期

3 楊潔;;基于貪婪算法的衛星區域觀測擺角方案選擇方法[J];廣西科學院學報;2006年02期

4 申時凱;吳紹兵;申浩如;王付艷;管彥慶;;計算最短公共超串的貪婪算法[J];計算機工程與設計;2007年08期

5 周柳陽;高珩;梁翥;;貪婪算法的實際應用[J];硅谷;2009年02期

6 李e，

本文編號：1996852