發布時間：2018-05-26 18:24

  本文選題：射頻識別 + 濕度傳感器　； 參考：《電子測量與儀器學報》2017年07期

【摘要】：提出了一種基于RFID技術的無芯片濕度傳感器標簽。通過開槽蝕刻技術在覆銅FR4材料上制作縫隙散射體結構。標簽結構分為兩個單元:編碼單元借助不同長度的縫隙組合存儲ID信息;通過在縫隙表面覆蓋硅納米線沉淀層構成傳感單元,用來感知濕度的變化。該方案結構簡單、成本低,無任何后處理工藝。測試系統利用交叉極化的兩臺喇叭天線作為發射和接收天線,依據雷達電磁反向散射原理測量傳輸系數曲線進而獲取標簽的ID信息和外界濕度信息。實驗測試表明在25℃溫度及30%~90%的相對濕度范圍內,該無芯片濕度傳感器標簽在215 MHz的頻帶范圍內中心諧振頻率與相對濕度呈現穩定的近似線性關系,其靈敏度超過2.9 MHz/%RH。
[Abstract]:A chipless humidity sensor label based on RFID technology is proposed. Slot scatters were fabricated on copper clad FR4 by slotted etching. The tag structure is divided into two units: the coding unit stores ID information with the combination of gaps of different lengths, and the sensing unit is formed by covering the surface of the gap with the silicon nanowire precipitation layer, which is used to sense the change of humidity. The structure of the scheme is simple, the cost is low and there is no post-treatment process. Two horn antennas with cross-polarization are used as transmitting and receiving antennas in the test system. According to the principle of radar electromagnetic backscattering, the transmission coefficient curve is measured and the ID information and the external humidity information of the tag are obtained. The experimental results show that in the temperature range of 25 鈩，

本文編號：1938395