發布時間：2018-05-17 22:05

  本文選題：聚苯乙烯粒子 + 噴墨打印　； 參考：《包裝工程》2017年05期

【摘要】：目的研究實現玻璃基底上快速制備光子晶體結構色的方法及條件。方法結合噴墨打印聚苯乙烯微球(PS)乳液與墨滴自組裝技術。首先乳液法合成PS乳液,然后將其配制成墨水,優化基底潤濕性、基底溫度、打印次數等打印條件,使PS粒子呈規則排列,最后采用光纖光譜儀、色度計對打印的結構色進行表征。結果采用含質量分?jǐn)?shù)為10%PS的墨水并添加乙二醇作為保濕劑,在基底溫度為45℃時,實現一次打印得到結構色。光譜反射曲線主反射峰在400 nm處,對應的反射率為83%,LCH分別為38.55,25.16,272.8。結論通過一次打印PS乳液可快速得到結構色,克服了傳統豎直沉積方法耗時耗材的缺點。結構色制備具有簡單、顯色獨特、耐老化性優良等優點,可用于包裝、防偽等領域。
[Abstract]:Aim to study the method and conditions for fast preparation of photonic crystal structure color on glass substrate. Methods combined with ink jet printing polystyrene microspheres (PSPS) emulsion and ink droplet self-assembly technology. PS emulsion was synthesized by emulsion method, and then prepared into ink. The printing conditions such as wettability, substrate temperature and printing times were optimized to arrange PS particles regularly. Finally, optical fiber spectrometer was used. The colorimeter characterizes the structural color of the print. Results the ink containing mass fraction of 10%PS and adding ethylene glycol as humidifier were used to obtain the structure color at the substrate temperature of 45 鈩，

本文編號：1903054