本文選題：光學測量 + 相位測量輪廓術�。� 參考：《光子學報》2017年03期

【摘要】：提出一種將傅里葉與相移法結合的三維物體快速測量方法.通過時域提取精確的均值包絡與頻域?yàn)V波結合的方法預處理?xiàng)l紋,結合基于相位半角的兩步相移,只需要兩幅相移條紋圖,即可得到精確的相位信息.通過仿真和實驗將本文方法與現有方法進行了分析對比,實驗結果證明,本文方法可以獲得優于現有兩步相移方法的準確度,一般測量環境下的均方根誤差在3×10~(-3) rad以內.本文提出的方法對噪聲和表面突變不敏感,具有魯棒性好、運算速度快、準確度高等優點,在三維快速測量領域有較高的應用價值.
[Abstract]:In this paper, a fast measurement method of three-dimensional object is presented, which combines Fourier and phase shift method. By extracting the accurate mean envelope in time domain and filtering in frequency domain, the fringe can be preprocessed, combined with the two-step phase shift based on the phase half-angle, and the accurate phase information can be obtained by only two phase shift fringes. The simulation and experiments show that the proposed method is more accurate than the existing two-step phase-shift method. The root mean square error in general measurement environment is within 3 脳 10 ~ (-3) rad. The method proposed in this paper is insensitive to noise and surface mutation, and has the advantages of good robustness, fast operation speed and high accuracy. It has high application value in the field of 3D fast measurement.
【作者單位】： 河北工業大學機械工程學院;
【基金】：國家自然科學基金(Nos.51675160,61171048) 河北省應用基礎研究計劃重點基礎研究項目(No.15961701D) 河北省高層次人才項目(No.GCC2014049) 河北省人才工程培養經費項目(No.A201500503) 天津市科技計劃項目(No.15PTSYJC00260)資助~~
【分類號】：TP391.41
，

本文編號：1828510