本文選題：自動配藥 + 需求分析��； 參考：《北京交通大學》2017年碩士論文

【摘要】：隨著生活水平的不斷提升,民眾對醫療水平的要求也越來越高。但是,目前國內大多數醫院的中藥房還是采用傳統的人工方式進行抓藥和發藥,其中存在著稱不準、分不均、復核難、浪費大、效率低、衛生差等諸多弊端。這樣不僅增加了醫院中藥房工作人員的勞動強度,而且延長了疾病患者的取藥等待時間,因此,設計一種全自動配藥系統就顯得十分重要。在此背景下,本文設計并實現了中藥自動配藥軟件管理系統,具體工作如下:首先,使用數據流分析方法對中藥自動配藥軟件管理系統進行需求分析,總結出系統的設計要求,然后根據這些要求確定中藥自動配藥軟件管理系統總體設計方案,分劃出不同的功能模塊模型,并建立數據庫概念模型。其次,在Visualstudi02012開發平臺下,使用C#及常用控件來實現中藥自動配藥軟件管理系統的功能模塊,包括條形碼信息識別模塊、通信模塊、數據庫模塊、多線程模塊和控制模塊,以及交互式界面的建立。條形碼信息識別模塊用來解讀接收到的條形碼信息。通信模塊可以實現中藥自動配藥軟件管理系統內的不同計算機之間的通信,還可以實現與下位機執行系統和條形碼閱讀器終端的通信。數據庫模塊是在SQL Server 2008關系型數據庫的基礎上進行數據庫建表。多線程模塊是用來完成不同線程間的同步和通信。控制模塊是中藥自動配藥軟件管理系統的核心模塊,包括主控模塊、接口模塊和補藥模塊。再次,對每個功能模塊完成程序測試后,按接口要求將功能模塊進行有序組合,然后搭建測試環境和設計黑盒測試使用的測試用例,對中藥自動配藥軟件管理系統進行軟件測試,并分析測試結果。最后,對本文的研究進行了歸納總結,并對進一步研究工作做出了展望。
[Abstract]:With the continuous improvement of living standards, the public's demand for medical standards is also getting higher and higher. However, at present, most Chinese pharmacies in domestic hospitals still use traditional manual methods to grasp and distribute drugs, among which there are many disadvantages, such as inaccurate weighing, uneven distribution, difficult reexamination, large waste, low efficiency, poor hygiene and so on. This not only increases the labor intensity of the hospital pharmacy staff, but also prolongs the waiting time for the patients to take medicine. Therefore, it is very important to design an automatic dispensing system. Under this background, this paper designs and implements the Chinese medicine automatic dispensing software management system, the specific work is as follows: first, using the data flow analysis method to carry on the demand analysis to the traditional Chinese medicine automatic dispensing software management system, summarizes the system design request. Then, according to these requirements, the overall design scheme of the software management system for automatic dispensing of traditional Chinese medicine is determined, and different functional modules are divided, and the conceptual model of database is established. Secondly, under the Visualstudi02012 development platform, we use C # and common controls to realize the function module of Chinese medicine automatic dispensing software management system, including bar code information identification module, communication module, database module, multithread module and control module. And the establishment of interactive interface. Bar code information recognition module is used to interpret the received bar code information. The communication module can realize the communication between different computers in the software management system of Chinese medicine automatic dispensing, and can also realize the communication with the execution system of lower computer and the terminal of bar code reader. The database module is based on the SQL Server 2008 relational database. Multithread module is used to complete synchronization and communication between different threads. The control module is the core module of the Chinese medicine automatic dispensing software management system, including the main control module, the interface module and the tonic medicine module. Thirdly, after completing the program test for each function module, the function module is composed in an orderly manner according to the interface requirements, and then the test environment is built and the test cases used in the black box test are designed. The software test of Chinese medicine automatic dispensing software management system is carried out, and the test results are analyzed. Finally, the research of this paper is summarized, and the further research work is prospected.
【學位授予單位】：北京交通大學
【學位級別】：碩士
【學位授予年份】：2017
【分類號】：TP311.52

【參考文獻】

相關期刊論文 前7條

1 周冬初;顏素華;肖嵐;邵艷輝;;自動化藥房管理系統在門診藥房的應用[J];中南藥學;2015年05期

2 陸銘;;我國中藥產業的發展現狀及趨勢[J];中國醫藥工業雜志;2013年02期

3 吳鏑;趙忠慧;;中藥配方顆粒的應用與研究[J];中國醫藥導報;2011年25期

4 戎文慧;詹正嵩;樸淳一;魏永堂;劉麗華;張曉燕;;中藥發展現狀與思考[J];白求恩軍醫學院學報;2011年03期

5 劉紅秀;梁偉賓;;中藥材管理系統的設計與開發[J];邵陽學院學報(自然科學版);2010年02期

6 趙陶麗;;藥房自動化是醫院藥房發展的必然趨勢[J];首都醫藥;2009年24期

7 韓晉;劉麗萍;謝進;袁海龍;;自動化設備對醫院藥房的影響[J];中國藥房;2006年19期

相關碩士學位論文 前8條

1 趙保龍;中藥顆粒自動化藥房系統設計[D];哈爾濱工業大學;2015年

2 梁玉;基于C#的數據采集上位機軟件設計[D];西安電子科技大學;2014年

3 袁振;中藥配方顆粒智能藥房控制系統的設計與實現[D];南京理工大學;2014年

4 徐教顯;代碼測試系統的性能優化研究[D];北京郵電大學;2014年

5 陳雅靜;中藥方管理系統的設計與開發[D];河北工業大學;2013年

6 陳亮;貴陽市委黨校學員管理系統的分析與設計[D];云南大學;2013年

7 孫鍇;自動中藥房上位機軟件系統的設計與實現[D];南京理工大學;2013年

8 趙偉;中藥自動配送控制系統的關鍵技術研究[D];南京航空航天大學;2012年

，

本文編號：1778178