【摘要】：為建立具有廣泛適用性的摩擦材料慣性縮比試驗方法,對慣性縮比試驗的試驗裝置和試驗流程進行初步研究,給出慣性縮比試驗裝置的基本特征以及可用于慣性縮比試驗的摩擦盤和摩擦材料樣塊的具體參數,提出速度和壓力縮比系數概念,并在臺架試驗標準ISO-26867的基礎上提出一種適用于慣性縮比試驗的建議試驗流程。在符合上述基本特征的慣性縮比試驗臺上進行實驗研究,并與同批次摩擦片的臺架試驗進行對比分析。結果表明,該試驗裝置執行建議縮比試驗流程測得的結果與臺架試驗可比性較好,證明了所提出試驗裝置與試驗流程的有效性,為摩擦材料慣性試驗方法的建立提供了借鑒。
[Abstract]:In order to establish a widely applicable test method for inertial shrinkage ratio of friction materials, a preliminary study was carried out on the test equipment and flow chart of inertial shrinkage test. The basic characteristics of the inertial shrinkage test device and the specific parameters of the friction disc and the friction material sample block which can be used for the inertial shrinkage test are given, and the concepts of velocity and pressure shrinkage coefficient are put forward. Based on the bench test standard ISO-26867, a suggested test procedure for inertial shrinkage test is proposed. An experimental study was carried out on the inertial shrinkage ratio test rig which accords with the above basic characteristics and was compared with the bench test of the same batch friction sheet. The results show that the experimental results obtained from the experimental process are comparable to those of the bench test, which proves the validity of the proposed test equipment and the test process, and provides a reference for the establishment of inertia test method for friction materials.
【作者單位】： 浙江師范大學工學院;中國第一汽車集團公司技術中心;吉林大學新拓科技開發公司;珠海華美汽車制動工業有限公司;
【基金】：國家自然科學基金項目(51507154)
【分類號】：U465
，

本文編號：2359437