轉向節襯套壓裝推孔雙工位機床控制系統的設計
發布時間：2018-11-04 13:49
【摘要】：分析了汽車前橋轉向節襯套壓裝推孔生產方式,結合加工流程,設計了基于三菱PLC的自動轉向節襯套壓裝推孔雙工位機床控制系統。對電氣控制系統和PLC軟件流程進行分析,實踐結果證明雙工位機床運行效率高,安全可靠。
[Abstract]:This paper analyzes the mode of production of pressure-pressing push hole for steering joint bushing of front axle of automobile, and designs the control system of double-station machine tool based on Mitsubishi PLC for pressure and push hole of automatic steering knuckle bushing. The electrical control system and PLC software flow are analyzed. The practical results show that the double-station machine tool is safe and reliable.
【作者單位】： 湖北汽車工業學院電氣與信息工程學院;湖北金仕偉智能裝備技術有限公司;
【分類號】：U468.2;TP273
，
本文編號：2310003
[Abstract]:This paper analyzes the mode of production of pressure-pressing push hole for steering joint bushing of front axle of automobile, and designs the control system of double-station machine tool based on Mitsubishi PLC for pressure and push hole of automatic steering knuckle bushing. The electrical control system and PLC software flow are analyzed. The practical results show that the double-station machine tool is safe and reliable.
【作者單位】： 湖北汽車工業學院電氣與信息工程學院;湖北金仕偉智能裝備技術有限公司;
【分類號】：U468.2;TP273
，
本文編號：2310003
本文鏈接：http://sikaile.net/kejilunwen/qiche/2310003.html
最近更新
教材專著
