【摘要】：以某微車后橋主減速器主、被動齒軸承安裝距引起后橋振動為研究對象,為了優化主、被動齒軸承安裝距對振動噪聲的影響和提高主、被動齒軸承使用壽命。通過三維建模和ADAMS動力學仿真,將不同安裝距在不同轉速下分別進行仿真分析,得到最佳安裝距,并通過試驗驗證了在該安裝距下,主減速器減振降噪得到很大的改善,而且軸承壽命也得到很大的提高,同時也為該微車主減速器的結構設計和減振降噪提供方法指導。
[Abstract]:The vibration of the rear axle caused by the installation distance of the main reducer of the rear axle of a micro vehicle was studied. In order to optimize the vibration noise of the bearing the influence of the installation distance of the passive tooth bearing on the vibration noise and the service life of the active and passive tooth bearing were improved. Through 3D modeling and ADAMS dynamic simulation, the different installation distance is simulated and analyzed separately at different rotational speeds, and the optimum installation distance is obtained, and the test results show that the main reducer vibration and noise reduction is greatly improved under the installation distance. The bearing life is also greatly improved, and it also provides guidance for the structural design and vibration reduction and noise reduction of the micro-vehicle reducer.
【作者單位】： 武漢理工大學機電工程學院;
【基金】：湖北省自然科學基金(2014CFB827)
【分類號】：U463.2

【相似文獻】

相關期刊論文 前1條

1 于剛;陶發荀;陶勇;;插管式結構主減速器總成主動齒輪安裝距調整墊片在線測選系統[J];汽車零部件;2009年02期

，

本文編號：2260265