本文關鍵詞：大功率白光LED在汽車前照燈設計中的應用研究，由筆耕文化傳播整理發布。

摘要

LED光源作為汽車照明系統的一門關鍵技術, LED汽車前照燈的配光設計是一個具有挑戰性的研究課題。根據光通量及色度指標的要求選擇LED光源, 采用拋物面反射器并結合兩者的偏移與旋轉來分析光分布。每個LED光源擁有獨立的光學系統, 并負責配光屏上不同區域的照度, 近光系統采用8個LED, 遠光系統采用10個LED。用CATIA三維設計軟件畫出組合反射器模型圖, 通過光學軟件Tracepro反復調用不同的模型來追跡光線得到最后的配光效果。設計中無需配光鏡、擋光板以及復雜的計算程序, 設計周期短、配光效果好, 給出的配光模擬照度值完全符合最新出臺的GB4599-2007標準。

關鍵詞

Abstract

Due to its superior performances such as energy saving and environmental protection, LED is widely used in automotive lighting. As a key technique on automotive lighting system, light distribution design of LED automotive headlamp is a challenging research subject. LED sources were chosen according to the standard, and Light distribution was analyzed by using parabolic reflector under moving and rotating conditions. Each light source has its self-contained optical system and arranges the irradiance of different area on distribute-screen, 8 LED sources were used in low-beam system, and 10 LED sources were used in high-beam system. Combined reflector model was drawn in CATIA software. The final results were achieved by using Tracepro after calling different lens model iteratively. Baffle board and complex calculation program were not required in this design process. This method has short design period and high distribution efficiency. The final illumination results completely conform to the revised standard of GB4599-2007.

補充資料

中圖分類號：TN312.8;U463.65

所屬欄目：光電系統與工程

收稿日期：2009-08-10

修改稿日期：2009-10-26

網絡出版日期：0001-01-01

作者單位    點擊查看

陳益民：廣東工業大學信息工程學院, 廣東 廣州 510006
聶蓉：廣東工業大學信息工程學院, 廣東 廣州 510006湖南鐵道職業技術學院, 湖南 株洲 412000
黃杰：湖南鐵道職業技術學院, 湖南 株洲 412000

聯系人作者：陳益民(cym@gdut.edu.cn)

備注：陳益民(1963-), 男, 湖南郴州人, 副教授, 碩士, 主要從事測控技術與智能儀器、LED應用技術研究工作。

【1】中國汽車照明學會．汽車用燈絲燈炮前照燈GB4599-2007［S］.北京：中國標準出版社, 2007.
China Illuminating Engineering Society.Motor vehicle headlamps equipped with filament lamps GB4599-2007［S］.Beijing:Standard Press of China,2007.(in Chinese)

【2】G中國汽車照明學會.汽車及掛車外部照明和光信號裝置的安裝規定GB4785-2007［S］.北京：中國標準出版社, 2007.
China Illuminating Engineering Society.Prescription for installation of the external lighting and light-signalling devices for motor vehicles and their trailers GB4785-2007［S］.Beijing:Standard Press of China,2007.(in Chinese)

【3】FALICOFF W.Optical design consideration for LED automotive lighting[J]. Strategies in light, 2003(3):180-186.

【4】余桂英, 陳曉麗, 姚帥,等．投射式LED汽車前照燈的光學設計[J].中國計量學院學報, 2008, 19(1)：73-77.
YU Gui-ying, CHEN Xiao-li, YAO Shuai, et al.An optical design of LED automobile headlamps based on projector systems[J].Journal of China Jiliang University, 2008, 19(1)：73-77.(in Chinese with an English abstract)

【5】蔣金波, 杜雪, 李榮彬．汽車照明系統的設計及超精密自由曲面加工技術[J].照明工程學報, 2008, 19(3)：46-52.
JIANG Jin-bo, TO Sandy, LEE W B.Design and fabrication of freeform reflector for automotive lighting system[J].China Illuminating Engineering Journal, 2008, 19(3)：46-52．(in Chinese with an English abstract)

【6】羅毅, 張賢鵬, 王霖, 等.半導體照明中的非成像光學及其應用[J].中國激光, 2008, 35(7)：963-971．
LUO Yi, ZHANG Xian-peng, WANG Lin, et al．Non-imaging optics and its application in solid state lighting[J].Chinese Journal of Lasers, 2008, 35(7)：963-971.(in Chinese with an English abstract)

【7】朱曉東.大功率白光LED在汽車前照燈設計中的應用研究［D］.湖北：武漢理工大學, 2007．
ZHU Xiao-dong.Research on application of high-power white LED to automobile headlamps［D］.Hubei：Wuhan University of Technology, 2007.(in Chinese)

【8】陳文成, 陳大華.白光LED汽車前照燈光學設計探討[J].中國照明電器, 2004(9):26-31.
CHEN Wen-cheng,CHENG Da-hua.Optical design of white LED to outomobile headlamps[J]. China light & lighting,2004(9):26-31.(in Chinese with an English abstrast)

【9】JIANG Hong-jiao, BEN Wang, North American Li-ghting, Inc.Etendue concerns for automotive headlamps using white LEDs[J].SPIE,2004,5187:234-242.

【10】趙云波, 魯軍尚, 侯洪生,等.CATIA V5基礎教程[M].北京：人民郵電出版社, 2007.
ZHAO Yun-bo, LU Jun-shang, HOU Hong-sheng, et al.CATIA V5 foundation course[M].Beijing：Posts & Telecom Press, 2007.(in Chinese)

引用該論文

CHEN Yi-min,NIE Rong,HUANG Jie. Optical design of automotive headlamp with LED[J]. Journal of Applied Optics, 2010, 31(3): 390-394

陳益民,聶蓉,黃杰. 汽車前照燈用LED光源的光學設計[J]. 應用光學, 2010, 31(3): 390-394

被引情況

【1】孫天錫,王亞軍,羅秉東,宋寧亮. 車燈自由曲面的配光設計. 光電技術應用, 2012, 27(2): 1-4

【2】李海濤,張?zhí)K娟,張煒,牟燕妮,吳偉,陸治國. 液體封裝LED汽車遠光燈光學設計. 光子學報, 2012, 41(11): 1327-1330

【3】張廣庚,崔榮華,宋國華,江賓,繆建文. LED汽車近光燈光學系統的設計與實現. 光學技術, 2015, 41(5): 438-441

  本文關鍵詞：大功率白光LED在汽車前照燈設計中的應用研究，，由筆耕文化傳播整理發布。