本文選題：表面織構 + 滑動軸承　； 參考：《潤滑與密封》2016年08期

【摘要】：以給定載荷和轉速的滑動軸承為對象,基于統一Reynolds方程法建立潤滑分析模型,研究幾種分布形式的表面織構對潤滑性能的影響。數值計算結果顯示:織構分布對軸承偏心率和最小厚度影響顯著,合理的部分分布織構明顯改善軸承的潤滑性能;存在最佳織構深度使得不同分布的織構潤滑效果最優;矩形凹槽、矩形凹坑、圓形凹坑的織構分布中,矩形凹槽潤滑效果最好;沿圓周方向單列矩形凹槽的潤滑效果優于多列矩形凹坑;表面織構在高速、輕載時改善潤滑的效果明顯。
[Abstract]:The lubrication analysis model of sliding bearings with given load and rotation speed was established based on the unified Reynolds equation method. The influence of surface texture of several distributed forms on lubrication performance was studied. The numerical results show that the distribution of texture has a significant effect on the eccentricity and minimum thickness of bearing, reasonable partial distribution texture can obviously improve the lubricating performance of bearing, and the optimum texture depth makes the lubrication effect of different distribution texture optimal. In the texture distribution of rectangular grooves, rectangular grooves, circular pits, rectangular grooves have the best lubricating effect; the lubricating effect of single-row rectangular grooves along the circumference is better than that of multi-row rectangular pits; the surface texture is at high speed. The effect of improving lubrication in light load is obvious.
【作者單位】： 北京理工大學機械與車輛學院;
【基金】：國家重點基礎研究發展規劃項目(973)(2011CB706602) 國家自然科學基金項目(50975029;51275045)
【分類號】：U464
，

本文編號：1806915