本文選題：深細盲孔　切入點：線陣CCD　出處：《長春理工大學》2016年碩士論文

【摘要】：本文設計了汽車制動缸內部檢測裝置。其主要功能為檢測制動缸內部補償孔的位置以及檢測其內部是否存在砂眼、裂紋等質量問題。由于制動缸外部輪廓比較復雜,屬于深細盲孔,并且所需檢測的補償孔的檢測基準為制動缸外部法蘭的外端面,因此準確的檢測補償孔的位置成為汽車行業的一大難點。本文設計的檢測裝置通過微位移傳感器采集零點,通過搭接的線陣CCD進行圖像掃描,通過計算機進行圖像處理,各個部分在回轉工作臺與機械進給裝置的協調下,實現對工件的檢測。檢測精度高、速度快且操作方便,符合現代工業的測量的標準。檢測裝置可達到的技術指標為:精度:0.03%FS,分辨率:0.001mm,重復性:0.005mm。
[Abstract]:In this paper, the internal detection device of automobile brake cylinder is designed.Its main function is to detect the position of compensation hole in brake cylinder and whether there are quality problems such as sand hole and crack inside.Because the external profile of brake cylinder is complex, it belongs to deep and thin blind hole, and the inspection datum of compensation hole is the external end face of external flange of brake cylinder, it is difficult to accurately detect the position of compensation hole in automobile industry.The detection device designed in this paper collects zeros by micro-displacement sensor, scans images by overlapping linear CCD, and processes images by computer. Each part is coordinated with the rotary table and the mechanical feed device.The detection of the workpiece is realized.High precision, high speed and convenient operation, accord with the standard of modern industry.The technical specifications of the detection device are: precision: 0.03FS, resolution: 0.001mm, repeatability: 0.005mm.
【學位授予單位】：長春理工大學
【學位級別】：碩士
【學位授予年份】：2016
【分類號】：U467.4

【相似文獻】

相關碩士學位論文 前1條

1 董傳宇;汽車液壓制動主缸缸體補償孔檢測儀的研究[D];長春理工大學;2016年

，

本文編號：1715133