本文選題：自動代碼　切入點：汽車電子控制系統　出處：《現代電子技術》2016年24期

【摘要】：傳統汽車電子控制系統自動化程度低,采用自動代碼生成技術設計并實現汽車電子控制系統,開發汽車電子控制系統的自動代碼生成環境,在Matlab平臺上開發MPC5634M芯片的自動代碼生成環境以及控制系統所需的驅動模塊。該設計以MPC5634M芯片為控制中心的汽車電子控制器硬件電路,并分析硬件電路中各模塊的設計原理。采用基于μC/OS-Ⅱ?qū)崟r(shí)操作系統的軟件架構,通過自動代碼生成技術將μC/OS-Ⅱ?qū)崟r(shí)操作系統嵌入Matlab/Simulink下的自動代碼生成環境底層文件中,在此基礎上開發汽車電子控制系統的軟件模型,采用模糊控制器實現控制系統中PI參數的調整。實驗結果表明,所設計系統在軟件代碼開發數量和效率上具有較大優勢,并且系統在實際控制過程中具有較好的穩定性和阻力效果。
[Abstract]:The traditional automobile electronic control system has low automation degree, so the automatic code generation technology is adopted to design and realize the automobile electronic control system, and the automatic code generation environment of the automobile electronic control system is developed.The automatic code generation environment of MPC5634M chip and the driving module of control system are developed on Matlab platform.The hardware circuit of automobile electronic controller based on MPC5634M chip is designed, and the design principle of each module in the hardware circuit is analyzed.The software architecture based on 渭 C / OS- 鈪，

本文編號：1702476