本文選題：非比例載荷　切入點：多軸疲勞　出處：《熱能動力工程》2017年08期

【摘要】：研究了最新ASME-Ⅷ-2規范推薦的用于非比例載荷下循環計數的最大最小循環計數法。首先通過定義最大最小循環計數法在應力-應變遲滯回線上的循環路徑,賦予了最大最小循環計數法合理的物理意義。然后結合von-Mises損傷準則和Miner線性損傷累積理論,編寫了非比例加載下使用最大最小循環計數法進行疲勞循環計數的實用程序,并成功應用該程序?qū)崿F(xiàn)了對某核電站振動小支管疲勞壽命的預測。對比了非比例載荷下最大最小循環計數法和傳統雨流計數法的循環統計結果,表明非比例載荷下最大最小循環計數法統計的等效應力幅值約為雨流法的1.085倍,循環次數約為雨流法的1.478倍。
[Abstract]:The paper studies the maximum minimum cycle count method recommended by ASME - VIII - 2 specification for non - proportional loading . First , by defining the cyclic path of the maximum minimum cycle count method on the stress - strain hysteresis loop , the paper gives the most reasonable physical meaning of the maximum minimum cycle count method . The maximum minimum cycle count method under non - proportional loading is used to predict the fatigue life of the small branch pipe of a nuclear power plant . The maximum minimum cycle count method under the non - proportional loading is compared with 1.085 times of the rain flow method , and the number of cycles is about 1.478 times of the rain flow method .

【作者單位】： 西安熱工研究院有限公司;福建寧德核電有限公司;
【分類號】：O346.2
，

本文編號：1698788