本文選題：桿　切入點：軸向交變載荷　出處：《機械強度》2016年06期 　論文類型：期刊論文

【摘要】：拉壓結構桿在結構工程中廣泛存在,是重要的承載元件。但因各種誤差的存在拉壓桿常處于偏心拉壓受載狀態中,研究其動態響應是保證其正確設計的理論基礎。針對等截面直桿承受端部軸向偏心諧和軸向載荷作用時的動態響應問題進行了研究,利用小變形假設和線性疊加原理將問題分解為兩個子問題,一個是軸向拉壓?jiǎn)栴},一個是彎曲問題。給出了細長桿件軸向位移和平面彎曲撓度隨不同擾動頻率的變化規律,為進一步的動態應力計算奠定了基礎,研究思路與應用分離變量法和傅立葉積分變換技術,對于研究桿件承受任意偏心軸向載荷和沿軸向分布荷載的動態響應問題具有重要指導意義。
[Abstract]:The strut of tension and compression structure widely exists in structural engineering and is an important bearing element. However, due to the existence of various errors, the strut is often in the state of eccentricity tension and compression. The research on the dynamic response is the theoretical basis to ensure the correct design. The dynamic response of the straight rod with equal cross section under the action of the eccentric axial harmonic and axial load at the end of the bar is studied. By using the assumption of small deformation and the principle of linear superposition, the problem is decomposed into two sub-problems, one is the axial tension and compression problem, the other is the bending problem. It lays a foundation for further dynamic stress calculation, and applies the method of separating variables and Fourier integral transform technique. It is of great significance to study the dynamic response of bars subjected to arbitrary eccentric axial loads and axial distributed loads.
【作者單位】： 煙臺汽車工程職業學院機電工程系;
【基金】：山東省科技攻關項目(2012G0030011)資助~~
【分類號】：O302

【相似文獻】

相關期刊論文 前2條

1 寧建國，楊桂通;球形殼在撞擊載荷作用下的超臨界動態響應[J];太原工業大學學報;1994年01期

2 ;[J];;年期

相關會議論文 前1條

1 張青平;陳成軍;陳剛;李思忠;;高速撞擊下含間隙結構的動態響應數值模擬[A];中國工程物理研究院科技年報（2002）[C];2002年

，

本文編號：1647679