本文關鍵詞： 工程力學 泛形裂紋 復雜度 穿夾雜 沿夾雜　出處：《兵工學報》2016年S1期 　論文類型：期刊論文

【摘要】：研究夾雜強度對復合材料復雜度的影響機理和規律。采用ABAQUS軟件及基于擴展有限元的粘性片段方法對復合材料的裂紋擴展進行了數值模擬,得到不同夾雜斷裂韌性材料的泛形裂紋構形,并用計盒維數計算其復雜度。計算結果表明,隨夾雜強度的增大,材料斷裂模式由穿夾雜轉為沿夾雜破壞,使泛形斷裂面復雜度增加。復雜度的增加呈現劇烈增長和緩慢增長兩個階段,兩個階段的臨界值與材料由穿夾雜斷裂向沿夾雜斷裂的臨界值相符。不同最大夾雜尺寸的同一尺寸試件的復雜度隨夾雜尺寸增大而增大。
[Abstract]:The mechanism and regularity of the influence of inclusion strength on the complexity of composites are studied. The crack growth of composites is numerically simulated by using ABAQUS software and viscous fragment method based on extended finite element method. The panoramic crack configurations of different inclusion fracture toughness materials are obtained, and the complexity is calculated by box-counting dimension. The results show that the fracture mode of materials changes from inclusion to inclusion failure with the increase of inclusion strength. Increase the complexity of the panoramic fracture surface. The increase of complexity presents two stages: violent growth and slow growth. The critical values of the two stages are consistent with the critical values of the material from the penetrating inclusion fracture to the inclusion fracture along the inclusion. The complexity of the same size specimen with different maximum inclusion sizes increases with the increase of the inclusion size.
【作者單位】： 北京理工大學爆炸科學與技術國家重點實驗室;
【基金】：國家自然科學基金項目(11221202)
【分類號】：O346;TB33
，

本文編號：1551661