【摘要】：利用高磷鮞狀赤鐵礦制備碳化鐵,產物中含磷組分是影響碳化鐵質量的關鍵因素。為了探究分離方式和添加劑對產物中含磷組分分離的影響,在1023K下分別用無添加、添加2%V2O5和添加5%Na2SO4的高磷鮞狀赤鐵礦制備碳化鐵,將制得的產物球磨不同時間后采用磁選或離心+磁選的方式進行產物分離,最后分析產物中含磷組分的變化。結果表明,延長球磨時間可以提高產物的脫磷率,但球磨時間過長會降低產物的鐵收得率,以球磨2h為宜;無添加劑時制備所得碳化鐵試樣球磨時間從1h延長至2h后,脫磷率從18.17%升至18.48%,再增加離心分離操作后,會進一步提升產物的脫磷率至23.04%;添加5%Na_2SO_4和2%V_2O_5均可破壞鐵礦石的鮞狀結構,有利于含F(xiàn)e組分與脈石的分離,但添加Na_2SO_4會降低產物的碳化鐵含量,而V_2O_5的添加則可同時促進碳化鐵的生成以及提高產物的脫磷率,是一種較好的添加劑。
[Abstract]:Iron carbide is prepared from high phosphorus oolitic hematite. The phosphorus content in the product is the key factor affecting the quality of iron carbide. In order to investigate the effect of separation methods and additives on the separation of phosphorus components in the product, iron carbide was prepared from high phosphorus oolitic hematite with no addition, addition of 2%V2O5 and 5%Na2SO4 at 1023K. After ball milling for different time, the product was separated by magnetic separation or centrifugal magnetic separation. Finally, the changes of phosphorus content in the product were analyzed. The results show that prolonging the milling time can increase the dephosphorization rate of the product, but too long milling time will reduce the iron yield of the product, which is suitable for 2 h ball milling, and the dephosphorization rate will be increased from 18.17% to 18.48% after the milling time is prolonged from 1 h to 2 h, and the dephosphorization rate will be further increased to 23.04% after increasing the centrifugal separation operation. The addition of 5%Na_2SO_4 and 2%V_2O_5 can destroy the oolitic structure of iron ore and is beneficial to the separation of Fe components from gangue, but the addition of Na_2SO_4 can reduce the content of iron carbide, while the addition of V_2O_5 can promote the formation of iron carbide and increase the dephosphorization rate of the product.
【作者單位】： 武漢科技大學省部共建耐火材料與冶金國家重點實驗室;武漢科技大學鋼鐵冶金及資源利用省部共建教育部重點實驗室;
【基金】：國家自然科學基金資助項目(51374159)
【分類號】：TD951

【相似文獻】

相關期刊論文 前10條

1 鄭曉光;魏茂彬;孫亞明;;球磨時間對NdFeBDyAlCu合金結構和磁性能的影響[J];吉林師范大學學報(自然科學版);2007年04期

2 王曉鵬;徐麗娟;陳玉勇;禹基道;肖樹龍;孔凡濤;劉志光;;球磨時間對粉末冶金制備Ti35Nb2.5Sn/10HA生物復合材料微觀組織的影響(英文)[J];Transactions of Nonferrous Metals Society of China;2012年03期

3 楊少彤;;電瓷泥料球磨時間超長的原因及球磨工藝管理[J];電瓷避雷器;1990年02期

4 符永明;劉偉;宗偉;沙江波;;球磨時間和熱壓溫度對粉末冶金Nb-16Si-22Ti-2Al-2Hf-2Cr合金顯微組織和室溫力學性能的影響[J];稀有金屬材料與工程;2013年02期

5 范壯軍,李建剛,翟更太,陳俊凌,宋進仁,劉朗;球磨時間對硼摻雜石墨材料抗氧化行為的影響[J];新型炭材料;2003年01期

6 肖勁;萬燁;李R，

本文編號：2527672