【摘要】：利用TG-DSC-DTG對不同品級鋁礬土進行熱分析,研究不同品級鋁礬土在不同溫度下的均化燒結情況,利用XRD、SEM對均化礬土熟料的物相組成和微觀結構進行研究。結果表明:Al2O3含量為89%(S級)、84%(I級)和74%(IIA級)的鋁礬土,其最佳均化燒結溫度分別為1580℃、1600℃和1650℃,各級均化礬土熟料在最佳燒結狀態下的晶體結構和生長形態為:S級、I級均化礬土熟料主要為發育良好的剛玉晶粒,大部分呈長柱狀,少量呈等軸狀,晶粒間結合緊密,雜質均勻分布在晶界的玻璃相中;IIA級均化礬土熟料中剛玉相與莫來石相共存,晶粒發育良好,莫來石晶體為長柱狀。
[Abstract]:The thermal analysis of bauxite of different grade was carried out by TG-DSC-DTG, and the homogenization sintering of bauxite at different temperature was studied. The phase composition and microstructure of bauxite clinker were studied by XRD,SEM. The results show that the optimum homogenizing sintering temperature of bauxite with Al2O3 content of 89% (S grade), 84% (I grade) and 74% (IIA grade) is 1580 鈩，

本文編號：2403549