本文選題：帶式輸送機　切入點：繼電器控制　出處：《河北科技大學》2015年碩士論文

【摘要】：隨著科學技術水平持續發展,工礦企業采用先進的自動化設備是提高企業經濟及安全效益的重要方法和措施。老式的帶式輸送機控制系統采用的是繼電器控制,但是體積大、故障多并且反應速度比較遲鈍,正逐漸淘汰而被新的控制系統所取代。PLC組成的控制系統其內部的觸點及繼電器可以多次被使用,反應快,并且構造簡單、體積小、故障少,這種控制系統將逐漸代替?zhèn)鹘y(tǒng)的控制方式而廣泛采用。本設計以冀中能源峰峰集團大淑村礦井下主運帶式輸送機原煤運輸系統技術改造項目為依據,進行煤礦井下主運帶式輸送機的PLC集散控制技術設計,主要設計了九部帶式輸送機的PLC集散控制系統。通過整理各部帶式輸送機的基礎資料,認真分析其運行現狀,最后制定了帶式輸送機對PLC控制系統的控制要求,并且確定了每部帶式輸送機的保護功能。設計PLC集散控制系統時充分考慮了煤礦安全生產過程的特點,實現了系統的集中管理、分散控制,增強了PLC的控制能力,更加提高了安全生產的綜合自動化水平。
[Abstract]:With the continuous development of science and technology, the adoption of advanced automation equipment in industrial and mining enterprises is an important method and measure to improve the economic and safety benefits of enterprises. The internal contacts and relays of the control system, which is being phased out and replaced by a new control system. PLC, can be used many times, react quickly, and are simple in structure, small in size, and less in failure. This control system will gradually replace the traditional control mode and be widely used. This design is based on the technical transformation project of the raw coal transportation system of the main transport belt conveyor in Dashucun Mine of Fengfeng Group in Jizhong. The PLC distributed control system of the main belt conveyor in coal mine is designed. The PLC distributed control system of nine belt conveyors is designed. Through sorting out the basic data of the belt conveyors, the present operation situation of the belt conveyors is analyzed. Finally, the control requirements of belt conveyor to PLC control system are formulated, and the protective function of each belt conveyor is determined. The characteristics of coal mine safety production process are fully considered in the design of PLC distributed control system. The centralized management and decentralized control of the system are realized, the control ability of PLC is enhanced, and the comprehensive automation level of safe production is improved.
【學位授予單位】：河北科技大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TD634.1

【參考文獻】

相關期刊論文 前10條

1 黃斌;黃宋魏;韓中園;黃靖慧;;加藥自動控制系統及應用[J];價值工程;2014年03期

2 薛章華;邢月華;付磊;吳靜然;;基于PLC和WinCC的帶式輸送機監控系統[J];煤礦機械;2012年06期

3 柴義曉;許維丹;;選礦自動化技術探討[J];工礦自動化;2011年10期

4 杜功儒;劉凱深;李建華;;基于PLC的帶式輸送機控制系統設計[J];煤礦機械;2009年11期

5 朱騰選;;皮帶運輸機常見故障及分析[J];煤炭技術;2009年02期

6 黃夷白;;PLC及其網絡在選煤樓集中監控系統中的應用[J];煤礦機械;2008年03期

7 文繼華;劉建斌;朱月紅;梁萍;;PLC在自動給料系統中的應用[J];科學技術與工程;2007年06期

8 于繼銘;張曉冬;耿宇缽;;礦用井下皮帶運輸機智能控制系統[J];電氣應用;2006年09期

9 于衛東;吳文藝;董和;訾鳳琴;;皮帶輸送機常見故障的分析與處理[J];科技資訊;2006年11期

10 聶朋偉;可編程序控制器在選煤自動化中的應用[J];礦業工程;2005年05期

，

本文編號：1681412