本文選題：防爆技術　切入點：組合開關　出處：《安徽理工大學》2015年碩士論文

【摘要】：煤礦井下惡劣的環境,正是由于井下有著大量的爆炸性氣體和煤塵,這就要求煤礦井下所有電氣設備都必須具有防爆性能。本文研制的組合開關就是根據GB3836-2010標準設計、開發、研制出來的。 本課題的研究主要分為四部分,第一部分是組合開關標準的確立和問題的提出,第二部分是組合開關防爆外殼的設計,第三部分是電氣設計和PLC程序的編寫,第四部分是各項性能的試驗。 在防爆外殼的設計中,運用了Solidworks軟件以及其中的simulation模塊,并且進行了模型簡化,運用了網格控制和網格劃分,最后進行了仿真分析,得出了防爆外殼的應力分布圖和位移圖。給組合開關外殼的設計提供了參考依據。 在電氣原理設計和PLC程序的編寫中,首先在總體上提出了控制方案,并以此為據設計出了電氣原理圖。根據“煤礦安全規程”規定：組合開關所具有的保護功能主要包括：漏電保護,過載保護、短路保護、斷相保護、欠壓保護和過壓保護。根據各種不同保護的具體要求,進行梯形圖程序的編寫。核心的中央控制單元選用了KC02-MD礦用本安模塊化可編程控制器。 在試驗部分,主要是依據標準要求,完成了組合開關的各項性能試驗,包括各種試驗數據、圖表、界面等。 本文研發的組合開關是根據GB3836.2-2010標準設計的,經試驗,符合國家標準要求。
[Abstract]:It is precisely because there are a lot of explosive gas and coal dust in the coal mine that all electrical equipments must have explosion-proof performance. The combined switch developed in this paper is designed and developed according to GB3836-2010 standard. Developed. The research of this subject is mainly divided into four parts. The first part is the establishment of the standard and the problem of the combination switch, the second part is the design of the explosion-proof shell of the combination switch, the third part is the electrical design and the writing of the PLC program. The fourth part is the performance test. In the design of explosion-proof shell, Solidworks software and simulation module are used, and the model is simplified, grid control and grid division are used. Finally, the simulation analysis is carried out. The stress distribution and displacement diagram of the explosion-proof shell are obtained, which provides a reference for the design of the combined switch shell. In the design of electrical principle and the programming of PLC program, the control scheme is put forward as a whole. According to the regulations of Coal Mine Safety Code, the protective functions of the combined switch mainly include: leakage protection, overload protection, short circuit protection, phase break protection, Undervoltage protection and overvoltage protection. According to the specific requirements of various kinds of protection, the trapezoidal diagram program is compiled. The central control unit of the core adopts KC02-MD modular programmable controller for mine safety. In the test part, according to the standard requirements, the performance tests of the combined switch are completed, including all kinds of test data, charts, interfaces and so on. The combined switch developed in this paper is designed according to GB3836.2-2010 standard.
【學位授予單位】：安徽理工大學
【學位級別】：碩士
【學位授予年份】：2015
【分類號】：TD684

【參考文獻】

相關期刊論文 前1條

1 郁青林;王東;湯東旭;李翠蘭;;基于PLC的礦用組合開關的設計[J];工礦自動化;2011年03期

，

本文編號：1654981