發布時間：2018-03-23 19:39

  本文選題：轉浸率　切入點：焙燒溫度　出處：《有色金屬(選礦部分)》2016年02期

【摘要】：對四種不同焙燒時間下的焙燒渣和酸浸后的殘?jiān)M(jìn)行浸出前后EDS形貌分析、MLA物相含量分布和釩元素賦存形式和走向?qū)Ρ确治鲅芯�。結果表明,釩渣焙燒前后釩尖晶石由致密光滑的表面變成表面凹凸不平且形成多孔的結構;MLA物相分析數據顯示,焙燒渣和殘?jiān)形锵嗟姆N類變化不大,但是由于釩酸鈣的大量減少導致物相含量在浸出前后變化很大;釩元素分布測試結果表明,焙燒前期影響釩轉浸率的因素是氧化鐵固溶體相因固溶大量的釩和其他雜質元素難以被酸浸出;當焙燒時間達到360 min后影響釩轉浸率的主要因素為燒結形成的輝石—硅酸鈣過渡相阻礙了氧的擴散導致部分釩元素包裹其中而難以被酸浸出。
[Abstract]:Four kinds of roasting slag and residue after acid leaching were analyzed by EDS before and after leaching. Before and after calcination of vanadium slag, vanadium spinel changed from compact and smooth surface to rugged surface and formed porous structure and MLA phase analysis data showed that the type of phase in calcined slag and residue changed little. However, due to the decrease of calcium vanadate, the phase content changes greatly before and after leaching. The factors that influence the leaching rate of vanadium in the early stage of roasting are that the solid solution phase of ferric oxide is difficult to be leached by acid because of the large amount of vanadium and other impurity elements. When the calcination time is up to 360 min, the main factor affecting the leaching rate of vanadium is that the transition phase of pyroxene and calcium silicate formed by sintering hinders the diffusion of oxygen, which results in the partial vanadium element being wrapped in it and difficult to be leached out by acid.
【作者單位】： 攀鋼集團研究院有限公司釩鈦資源綜合利用國家重點實驗室;
【分類號】：TD954

【相似文獻】

相關期刊論文 前3條

1 楊俊英,葛鐵柱,尹淑平,王明輝;硫酸鉀生產新方法[J];河南化工;1994年12期

2 袁寰;馬冬云;張磊;;純化單層碳納米管的正交實驗法[J];佳木斯大學學報(自然科學版);2009年02期

3 ;[J];;年期

，

本文編號：1654887