本文選題：淺埋深煤層　切入點：特大采高綜采工作面　出處：《煤炭科學技術》2016年04期 　論文類型：期刊論文

【摘要】：為了防治大柳塔煤礦52303大采高綜采工作面機尾冒頂事故,采用理論分析、現場實測等方法分析了礦壓顯現異常、二次采動影響、推進速度慢、現場管理人員經驗不足、過渡支架梁端距過大是52303工作面冒頂?shù)闹饕?在此基礎上提出采用馬麗散材料加固煤壁及頂板、工作面冒頂較高區域充填羅克休材料、加強聯絡巷附近巷道支護等技術措施�，F(xiàn)場應用結果表明:該措施及時改變圍巖的松散結構,有效地防止了煤壁片幫和頂板冒落,提高煤巖體的整體強度,工作面推進過程中均未出現顯著的冒頂、片幫事故,工作面頂板漏矸問題也得到了有效控制。
[Abstract]:In order to prevent and cure the caving accident of 52303 large mining height fully mechanized mining face in Daliuta Coal Mine, this paper analyzes the abnormal rock pressure appearance, the secondary mining effect, the slow speed of propulsion and the lack of experience of the field management personnel by using the methods of theoretical analysis and field measurement, etc. The main reason of roof fall in 52303 working face is that the end distance of transition support beam is too large. On this basis, it is proposed that the coal wall and roof should be strengthened with Marisan material, and Roxiu material should be filled in the higher area of roof falling in the working face. The field application results show that the measures can change the loose structure of surrounding rock in time, effectively prevent coal wall and roof from falling, and improve the overall strength of coal and rock mass. In the process of working face advance, there is no obvious roof fall, and the roof leakage and gangue problem have been effectively controlled.
【作者單位】： 神華神東煤炭集團有限責任公司大柳塔煤礦;
【分類號】：TD327.2
，

本文編號：1617842