本文選題：煤礦電力系統　切入點：油浸式電力變壓器　出處：《工礦自動化》2017年06期 　論文類型：期刊論文

【摘要】：采用"部件-故障原因-溫升現象"的3層結構對油浸式電力變壓器故障進行了分類,總結了各類故障產生的原因,分析了各類故障對變壓器外表面溫度變化的影響。結果表明:鐵芯及夾件、繞組及引線、分接開關、絕緣系統和油箱及底座等故障都會引起變壓器外表面溫度升高;冷卻系統故障必然導致變壓器外表面溫度升高;一部分進出線套管故障會引起變壓器外表面溫度升高;大多數保護和測量裝置故障會引起變壓器溫度升高。從而得出了油浸式電力變壓器故障與其本體外表面溫度的初步關系,即變壓器故障大多會導致變壓器外表面溫度升高。
[Abstract]:The 3 layer structure by reason "part of fault - temperature rise phenomenon" the classification of oil immersed power transformer fault, summarizes the reasons of fault, analyzes the influence of all kinds of faults on the surface of the transformer temperature changes. The results show that the iron core and clamps, and winding wire, switch, insulation system and the fuel tank and the base fault will cause the surface of the transformer temperature; cooling system failure will inevitably lead to the surface of the transformer temperature rise; a part of inlet casing fault will cause the surface of the transformer temperature rise; most of the protection and measurement device failure will cause the temperature of the transformer is obtained. Preliminary oil immersed power transformer fault and its relationship the outer surface temperature, the transformer fault mostly leads to the surface of the transformer temperature rise.

【作者單位】： 中國礦業大學信息與控制工程學院;上海鐵路局徐州供電段;
【基金】：上海鐵路局科研計劃項目(2013049)
【分類號】：TD605

【相似文獻】

相關期刊論文 前1條

1 張連昌;美國政府法典(電氣防爆部分)[J];煤礦安全;1983年08期

，

本文編號：1617597