本文選題：充填系統　切入點：全粒徑碎石　出處：《礦業研究與開發》2017年09期 　論文類型：期刊論文

【摘要】：結合會東大梁礦業東部高品位礦體充填開采技術經濟條件,研發出全粒徑碎石泵送充填技術并建立了國內第一套全粒徑碎石泵送膠結充填系統。介紹了該充填系統工藝流程及工業試驗。結果表明,該系統工藝可行、流程暢通,充填能力可達60~80 m3/h,充填料漿灰砂比1∶4~1∶8可調,充填體3d強度達0.80~1.79 MPa,28d強度達1.92~4.70 MPa,系統及工藝各項指標均能滿足大梁礦業上向分層進路充填采礦的要求。
[Abstract]:Combined with the technical and economic conditions of filling and mining of high-grade ore bodies in the eastern part of Huidongdaliang Mining Industry, In this paper, the technology of pumping filling with full diameter crushed stone is developed and the first set of cemented filling system is established in China. The technological process and industrial test of the filling system are introduced. The results show that the technology of the system is feasible and the flow is smooth. The filling capacity can reach 60 ~ 80 m ~ (3 / h), the ratio of slurry to sand is 1: 4 / 1: 8, the 3D strength of the filling body is 0.80 ~ 1.79 MPA / h, and the intensity is 1.92 ~ 4.70 MPA / h. The system and technological indexes can meet the requirements of the upward stratified road filling mining in Deliang mining industry.
【作者單位】： 長沙礦山研究院有限責任公司;國家金屬采礦工程技術研究中心;
【分類號】：TD853.343

【相似文獻】

相關期刊論文 前10條

1 王R，

本文編號：1567874