【摘要】：正角區分離是軸流壓氣機中普遍存在的一種流動結構,尤其是在非設計工況下,角區分離會導致壓氣機效率降低,增壓能力下降。針對這一問題,中國科學院工程熱物理研究所的研究人員采用平面葉柵實驗與三維CFD(計算流體力學)數值模擬相結合的方法,對壓氣機典型工況下的角區分離流動結構,以及損失特性進行了深入研究。
[Abstract]:The separation of positive angle region is a common flow structure in axial flow compressor, especially under non-design conditions, the separation of angle region will lead to the decrease of compressor efficiency and the decrease of supercharging capacity. In order to solve this problem, the researchers at the Institute of Engineering Thermophysics of the Chinese Academy of Sciences adopted the method of combining plane cascade experiment with three-dimensional CFD (Computational fluid Dynamics) numerical simulation to separate the flow structure in the angular region of the compressor under typical working conditions. And the loss characteristics are deeply studied.
【分類號】：TH453

【相似文獻】

相關期刊論文 前10條

1 劉濱春;;平面葉柵特性的實驗分析[J];試驗技術與試驗機;2007年04期

2 張培;楚武利;吳艷輝;張浩光;盧家玲;;一種平面葉柵反設計方法的改進與驗證[J];航空動力學報;2009年07期

3 姚征;平面葉柵速度圖法有限元分析[J];上海機械學院學報;1983年02期

4 崔淑琦;王松s，

本文編號：2491503