發布時間：2019-05-27 19:33

【摘要】：回轉式烘干機因其適應性強而廣泛應用于各類顆粒物料的烘干,其中三筒回轉式烘干機更具優越性及廣闊的市場前景,但其回轉裝置關鍵結構參數普遍存在以下問題:內筒及中筒尺寸不科學,導致烘干效率較低,流體運行阻力大,物料易堵塞;三層筒體的鋼板厚度不合理,磨損不均勻,尤其外筒磨損特別嚴重。本文對回轉裝置進行了傳熱學、兩相流運動學及三層筒體磨損規律的分析,并從工程應用角度提出了其關鍵結構參數的具體確定方法。
[Abstract]:The rotary dryer is widely used in the drying of all kinds of particulate materials because of its strong adaptability, among which the three-barrel rotary dryer has more advantages and broad market prospects. However, the key structural parameters of the rotary device generally have the following problems: the size of the inner cylinder and the middle cylinder is not scientific, resulting in low drying efficiency, large fluid operation resistance and easy blockage of materials; The thickness of the steel plate of the three-layer cylinder is unreasonable and the wear is uneven, especially the wear of the outer tube is especially serious. In this paper, the heat transfer, two-phase flow kinematics and the wear law of three-layer cylinder are analyzed, and the concrete determination method of its key structural parameters is put forward from the point of view of engineering application.
【作者單位】： 鹽城工學院機械工程學院;
【基金】：江蘇省新型環保重點實驗室聯合開放課題基金資助(No.AE201428) 2012年度江蘇省散裝水泥科研項目計劃資助
【分類號】：TH69
，

本文編號：2486425