【摘要】：采用熱壓工藝,利用正交試驗方法,確定了均苯型聚酰亞胺的成形工藝參數,研究了溫度對聚酰亞胺保持架材料拉伸強度、硬度和摩擦學的影響,分析了裝有均苯型聚酰亞胺保持架軸承的高溫高速適應性和抗貧油能力。結果表明:工藝優化后的均苯型聚酰亞胺保持架材料260℃時拉伸強度為71 MPa,拉伸強度保持率為64.5%,硬度和磨損量幾乎不變,裝有均苯型聚酰亞胺保持架的軸承高溫高速適應性良好,抗貧油能力優于裝有傳統銅保持架的軸承。
[Abstract]:The forming process parameters of isobenzene polyimide were determined by means of orthogonal test, and the effects of temperature on tensile strength, hardness and tribology of polyimide cage were studied. The high temperature and high speed adaptability and lean oil resistance of polyimide cage bearing with isobenzene type are analyzed. The results show that the tensile strength of the polyimide cages with isobenzene type is 71 MPa, at 260 鈩，

本文編號：2398581