【摘要】：結合平面曲線輪廓度誤差評定的最小條件原則及雙曲線的幾何特性,提出了基于幾何遍歷搜索的平面任意位置雙曲線輪廓度誤差評定算法。首先,依據最小二乘法得到測量數據的最小二乘雙曲線方程和兩個焦點坐標。其次,在兩焦點周圍按一定規則布置一系列的輔助點并構造出一系列輔助雙曲線。然后,計算出所有測量點到輔助雙曲線距離的極差值。經過比較和判斷,最終實現雙曲線輪廓度的最小區域評定。
[Abstract]:Based on the minimum condition of contour error evaluation of plane curve and the geometric characteristics of hyperbolic curve, an algorithm for evaluating the contour error of hyperbolic curve at any position is proposed based on geometric ergodic search. First, the least square hyperbolic equation and two focal coordinates of the measured data are obtained by the least square method. Secondly, a series of auxiliary points are arranged around the two focal points according to certain rules and a series of auxiliary hyperbolic curves are constructed. Then, the extreme difference between all the measured points and the auxiliary hyperbolic distance is calculated. Through comparison and judgment, the minimum region evaluation of hyperbolic contour is realized.
【作者單位】： 河南科技大學機電工程學院;上海理工大學機械工程學院;洛陽軸承科技股份有限公司;
【基金】：河南省高等學院重點資助科研項目(17A410001) 河南省性能軸承技術重點實驗室開放基金(2016ZCKF03)
【分類號】：TH161

【相似文獻】

相關期刊論文 前3條

1 索廣韜;套圈溝道曲率半徑及線輪廓度誤差的定量測量[J];軸承;1991年05期

2 劉四虎,熊則男,朱均;一種對渦旋體線輪廓度誤差進行評價的新方法[J];西安交通大學學報;1996年07期

3 ;[J];;年期

，

本文編號：2391016