液壓風力發電系統穩定性控制仿真研究
[Abstract]:Wind power generation as a clean energy in the increasingly tense energy crisis emerged. In order to reduce the investment cost of wind power generation and facilitate maintenance and maintenance, hydraulic wind power generation system is of great significance to improve this point. However, because of the variability of external wind energy, it is necessary to study the control of hydraulic system to ensure the stability of power generation. The improvement of hydraulic system will speed up the development of wind power industry and will open a new era for wind power industry. In this paper, the current situation of wind power generation at home and abroad, the research situation of wind power in the world and the great advantages of wind power generation in China are introduced. Secondly, the technology of wind power generation is studied, and the application of hydraulic technology in wind power generation is discussed. According to the technical problems of wind power generation at present, the hydraulic wind power generation system is put forward. Thirdly, the hydraulic wind power system is designed. Based on the AMESim software and the physical model of each component, the mathematical model is first analyzed and designed, then the AMESim model of the component is established step by step. And the whole system simulation model is established. Finally, through the system simulation model, the stability of the hydraulic wind power system is simulated, and the links that affect the stability are analyzed in detail, and each link is controlled to realize the stable output of the motor speed of the whole hydraulic system. Thus, the stable output of generation voltage is realized, and the analysis operation is simple and fast. The simulation results are compared by using PID control technology, and the feasibility of simulation is verified, and the factors affecting the stability of the system and the solution are obtained. It provides a theoretical basis for further research.
【學位授予單位】:燕山大學
【學位級別】:碩士
【學位授予年份】:2012
【分類號】:TH137
【參考文獻】
相關期刊論文 前10條
1 沈文春;;風電設備制造面臨良好發展機遇[J];東方企業文化;2007年06期
2 張雷;鄂春良;李海東;;PLC在大型風力機變槳距系統中的應用[J];電氣應用;2007年09期
3 劉湘琪,邱敏秀,林勇剛;液壓技術在風力發電系統中的應用[J];機床與液壓;2004年08期
4 劉海麗;李華聰;;液壓機械系統建模仿真軟件AMESim及其應用[J];機床與液壓;2006年06期
5 李華聰;李吉;;機械/液壓系統建模仿真軟件AMESim[J];計算機仿真;2006年12期
6 蘇東海;于江華;;液壓仿真新技術AMESim及應用[J];機械;2006年11期
7 萬麗榮;趙勝剛;沈瀟;李慶國;;基于MATLAB/SIMULINK的變量泵變量馬達調速系統動態仿真[J];煤礦機械;2007年02期
8 劉偉;關于模糊PID控制器的應用設計[J];沈陽工業大學學報;2003年02期
9 李強,姚興佳,陳雷;兆瓦級風電機組變槳距機構分析[J];沈陽工業大學學報;2004年02期
10 林勇剛;李偉;陳曉波;顧海港;葉杭冶;;大型風力發電機組獨立槳葉控制系統[J];太陽能學報;2005年06期
相關博士學位論文 前1條
1 林勇剛;大型風力機變槳距控制技術研究[D];浙江大學;2005年
相關碩士學位論文 前9條
1 劉湘琪;風力發電機組電液比例變槳距控制系統的研究[D];浙江大學;2004年
2 劉海麗;基于AMESim的液壓系統建模與仿真技術研究[D];西北工業大學;2006年
3 陳曉波;風力發電機組電液比例變槳距控制半物理仿真試驗臺研究[D];浙江大學;2006年
4 李兵;基于DSP的電液伺服系統數字控制研究[D];北京交通大學;2008年
5 張薇;二次調節轉速控制系統影響因素的研究[D];燕山大學;2008年
6 顧鑫;兆瓦級風力發電機組液壓變槳距系統研究[D];江南大學;2008年
7 馮江哲;兆瓦級風力發電機組控制技術的研究[D];華北電力大學(河北);2009年
8 劉偉奇;閥控非對稱缸電液位置伺服系統控制的研究[D];北京交通大學;2009年
9 曾鍇;渤海灣海上風能發電陸地維保地的選址分析[D];天津大學;2010年
本文編號:2390488
本文鏈接:http://sikaile.net/kejilunwen/jixiegongcheng/2390488.html