【摘要】：氣動打標技術是用數控設備控制打印針頭按照編輯好的字符或圖形軌跡運動,同時氣動設備控制高壓氣體高頻沖擊打印針,在工件表面形成由密集點陣組成的字符或圖形的一種打標技術。氣動打標機系統是由機械、電子和數控技術組成的產品,其在工業領域應用十分廣泛。近年來,隨著計算機技術的發展,USB2.0接口憑借其諸多優勢已經普及,因此,開發基于USB2.0高速接口的氣動打標機系統,提高企業產品競爭力成為必然。本文根據課題實際需要,提出并實施了一種基于USB2.0的高速接口的氣動打標機系統方案。 本文依次從硬件和軟件兩方面介紹了系統的解決方案和實施技術。上位機客戶端軟件采用Visual Basic開發,USB功能驅動程序則采用DriverStudio工具軟件來開發,并采用Visual C++來開發的動態鏈接庫(DLL);使用Altium Designer軟件制作印制電路板;采用CYPRESS公司生產的USB2.0芯片CY7C68013A來實現數據的傳輸;采用AT89S52單片機來完成數控插補運算及對步進電機的運動控制和I/O處理;在Keil uVision4開發環境下,用基于單片機的C51語言編寫了CY7C68013A的數據通信軟件和AT89S52的數控插補及I/O處理軟件;最后對系統進行了聯機調試。 該系統實用性強,采用自主設計的USB2.0接口系統與傳統的并行接口相比,抗干擾能力強,硬件電路集成度高、功耗低、成本低,支持熱插拔,即插即用、兼容性強。USB數據傳輸采用CY7C68013A的Slave FIFO模式,數據傳輸速度快,能穩定的完成數據的傳輸。USB2.0數據傳輸模塊與PC機的通訊采用通用動態函數庫封裝,保證了該模塊在不同編程平臺下的通用性,易用性,便于系統的升級。
[Abstract]:Pneumatic marking technology is to use numerical control equipment to control the printing needle according to the edited characters or graphics track, while pneumatic equipment control high-pressure gas high-frequency impact printing needle, A marking technique for forming characters or graphics consisting of a dense lattice on the surface of a workpiece. Pneumatic marking machine system is composed of mechanical, electronic and numerical control technology, which is widely used in industry. In recent years, with the development of computer technology, USB2.0 interface has been popularized by virtue of its many advantages. Therefore, it is inevitable to develop pneumatic marking machine system based on USB2.0 high-speed interface to improve the competitiveness of enterprise products. In this paper, a pneumatic marking machine system based on high speed interface of USB2.0 is put forward and implemented according to the actual needs of the subject. This paper introduces the solution and implementation technology of the system from two aspects: hardware and software. The upper computer client software is developed by Visual Basic, the USB function driver is developed by DriverStudio tool software, and the dynamic link library (DLL); developed by Visual C uses Altium Designer software to make printed circuit board. The USB2.0 chip CY7C68013A produced by CYPRESS company is used to realize the data transmission, the AT89S52 single chip computer is used to complete the NC interpolation operation, the motion control of step motor and I / O processing. In the Keil uVision4 development environment, the data communication software of CY7C68013A and the NC interpolation and I / O processing software of AT89S52 are programmed with C51 language based on single chip computer. Finally, the on-line debugging of the system is carried out. Compared with the traditional parallel interface, the self-designed USB2.0 interface system has the advantages of strong anti-interference ability, high integration of hardware circuit, low power consumption, low cost, support for hot plug and play, plug and play. USB data transmission adopts the Slave FIFO mode of CY7C68013A, the data transmission speed is fast, and the data transmission can be completed stably. The communication between USB2.0 data transmission module and PC computer is encapsulated by general dynamic function library. This module is easy to use and easy to use in different programming platforms. It is easy to upgrade the system.
【學位授予單位】：重慶大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TH138.9

【參考文獻】

相關期刊論文 前10條

1 劉國永,陳杰平;單片機控制步進電機系統設計[J];安徽技術師范學院學報;2002年04期

2 何攀;嚴宏志;;氣動打標系統動態特性分析[J];包裝工程;2007年12期

3 周小鵬,謝普;工業氣動標記機PCB板的設計[J];重慶工業高等�？茖W(xué)校學報;2000年02期

4 郭浩;黎福海;;高速USB2.0設備的PCB板設計[J];單片機與嵌入式系統應用;2006年05期

5 江衛華;基于PC計算機并行口氣動標記機系統的設計[J];電氣傳動自動化;2002年01期

6 劉昌勇;;增強型氣動打標機針頭動力學模型分析[J];裝備制造技術;2008年10期

7 崔霽陽;打標、識讀技術在汽車制造業中的應用——訪上海通友自動化科技有限公司張國夫先生[J];汽車與配件;2002年19期

8 宛杰魁,劉建新;氣動標記機系統若干關鍵算法研究[J];四川工業學院學報;2004年04期

9 金朝輝;;采用CY7C68013芯片的USB2．0系統固件程序設計[J];世界電子元器件;2006年07期

10 陳永國,張新敏,李娜,王玉生;氣動標記打印機打印頭運動過程的分析[J];沈陽工業大學學報;2004年06期

相關碩士學位論文 前2條

1 楊鵬;基于單片機的便攜式打標機的應用與研究[D];重慶大學;2007年

2 曹雛清;基于USB 2.0高速接口的機床振動實驗系統的開發[D];重慶大學;2008年

，

本文編號：2388127