氣動電磁閥綜合性能測試系統的研究
[Abstract]:With the development of science and technology, industrial production has moved from manual operation to automation. Solenoid valve, as the main control element of control system, has the advantages of fast response, simple structure, strong anti-pollution ability, good repeatability, stable and reliable action, and small volume. The advantages of light weight, low power consumption and low price make it more and more popular in industry. In this paper, various characteristics of pneumatic solenoid valve, including flow characteristics, response characteristics, lifetime, seal performance, minimum working pressure, voltage characteristics (electromagnet suction voltage and release voltage), are analyzed. On this basis, a design scheme of a comprehensive performance testing system is proposed and realized. Finally, the characteristics of pneumatic solenoid valve are further understood by using the test results. In the first chapter, the development history of solenoid valve and its application are described, and the research situation and development trend of solenoid valve testing system at home and abroad are analyzed and summarized. On the basis of this, the significance and research content of the subject are put forward. In the second chapter, starting from the basic structure and working principle of solenoid valve, the testing performance of pneumatic solenoid valve is analyzed in detail, and the actual test object and test method are obtained in combination with relevant international standards, national standards and industry standards. In the third chapter, the design scheme of the pneumatic solenoid valve comprehensive performance test system is put forward, and the hardware design, software design and the important difficulties in the design process are analyzed in detail. In chapter 4, on the basis of the previous work, the performance of a single electrically controlled solenoid valve with five ports is tested, and the data are analyzed briefly, which provides the basis for the optimization design of the solenoid valve. In the fifth chapter, the main research work is summarized, and the future research work and direction are prospected.
【學位授予單位】:浙江大學
【學位級別】:碩士
【學位授予年份】:2011
【分類號】:TH138.52
【參考文獻】
相關期刊論文 前10條
1 黃官升,丁華榮,楊青;高速響應電磁閥的研究[J];兵工學報;1998年02期
2 張忠祥;劉志珍;;高速開關電磁閥的模型分析及控制方法研究[J];電氣應用;2007年11期
3 鄭長鑒;淺談電磁閥動作時間分析[J];電氣開關;1997年01期
4 鄒開鳳;陳友龍;;高速電磁閥響應特性的研究[J];海軍航空工程學院學報;2005年06期
5 沈公槐;改進電磁閥動態特性的一種方法[J];航天控制;2001年03期
6 黃茂楊,張靖,翟羽健;高速電磁閥特性測試系統及其應用[J];測控技術;2004年11期
7 楊玉濤;張小棟;;高速電磁閥模型建立及響應特性研究[J];測控技術;2008年06期
8 鄭長鑒;電磁閥動作時間分析[J];機床電器;1996年02期
9 施光林,鐘廷修;高速電磁開關閥的研究與應用[J];機床與液壓;2001年02期
10 謝建蔚,陶國良,周洪;客車ABS氣壓電磁閥動態性能檢測系統的設計[J];機床與液壓;2004年10期
相關博士學位論文 前1條
1 汪志剛;柴油機中壓共軌系統大流量高速電磁閥的優化研究[D];武漢理工大學;2006年
相關碩士學位論文 前5條
1 王曉麗;電磁閥執行器——混合式直線力電機的特性分析[D];太原理工大學;2003年
2 汪志剛;高速強力電磁閥及其測試臺架的優化研究[D];武漢理工大學;2003年
3 張美麗;新型自保持電磁閥的研制與磁性材料的應用[D];合肥工業大學;2004年
4 龍意忠;高速電磁閥試驗臺設計[D];貴州大學;2006年
5 溫明成;氣動電磁閥可靠性試驗方法的研究[D];大連海事大學;2008年
,本文編號:2385505
本文鏈接:http://sikaile.net/kejilunwen/jixiegongcheng/2385505.html