發布時間：2018-11-02 12:15

【摘要】：采用等環量扭曲規律設計的軸流泵葉片扭曲度大,在小流量工況下易造成根部沖角過大,使軸流泵效率明顯下降。通過葉根側等環量修正因子改變?nèi)~輪的幾何形狀,提高流動效率;并通過CFD數值計算驗證改進的葉輪模型。研究結果發現,葉根側環量修正因子的變化對軸流泵葉輪效率、揚程影響顯著。減小葉根側等環量因子,可以提高低流量工況的效率;但會使得大流量工況效率急劇惡化。對于研究的軸流泵模型,葉根處的等環量修正因子在0.3~0.55內較為適宜。
[Abstract]:The axial flow pump blade designed by the law of equal annular volume distortion has a large twist degree, which is easy to cause too large an angle of attack at the root under the condition of small flow rate, and the efficiency of the axial flow pump is obviously reduced. The geometric shape of the impeller is changed by the equal-ring correction factor of the blade root side, and the flow efficiency is improved, and the improved impeller model is verified by CFD numerical calculation. The results show that the change of the side ring correction factor has a significant effect on the impeller efficiency and head of the axial flow pump. The efficiency of low flow condition can be improved by reducing the equal circulation factor of blade root side, but the efficiency of large flow condition will deteriorate sharply. For the model of axial flow pump studied, the equal-loop correction factor at the root of the blade is in the range of 0.3 ~ 0.55.
【作者單位】： 海軍裝備部;上海理工大學能源與動力工程學院;
【基金】：上海市科委科研計劃項目(13DZ2260900)資助
【分類號】：TH312

【相似文獻】

相關期刊論文 前10條

1 李慎安;;修正值和修正因子的不確定度[J];中國計量;2010年07期

2 張亦明;Okumura模型的公式化[J];天津大學學報;1993年01期

3 杜濤，

本文編號：2305984