【摘要】：可靠性、維修性是設備全壽命周期研究中不可缺少的概念,維修性與可靠性是密切相關的,二者都是決定設備或系統有效性的因素。本文通過建立基于時變可靠度的全壽命系統維修模型,探討系統全壽命周期內可靠性、維修性的變化規律,研究相關可靠性、維修性指標的求解方法,并對如何通過工程實際數據得到模型相關參數進行分析。本文主要研究內容如下： (1)研究基礎的維修理論；通過理論推導,建立基于時變可靠度的全壽命周期維修性模型。 (2)研究基于時變可靠度的維修模型的維修間隔期和可靠度計算問題；應用模型分析系統可靠度變化情況。 (3)應用MATLAB語言編寫模型相關計算程序；應用C語言編制模型計算界面；在MATLAB環境下對相關數據進行仿真擬合,得到系統主要維修性參數的預期函數。 (4)研究如何通過工程實際數據來確定模型主要參數的技術方法,通過實例驗證該方法的可行性。 (5)引入效益度函數,將可靠性指標與經濟性指標相結合,用于判定系統的極限技術狀態,確定系統的全壽命周期。 (6)進行模型可用性的驗證,應用模型對某設備監控系統的維修性進行優化,并與采用其它模型的方法進行比較分析,得到新模型的優點與不足。
[Abstract]:Reliability and maintainability are indispensable concepts in the research of equipment life cycle. Maintainability and reliability are closely related to each other. Both are the factors that determine the effectiveness of equipment or system. In this paper, by establishing the maintenance model of the whole life system based on time-varying reliability, the variation law of reliability and maintainability in the whole life cycle of the system is discussed, and the method of solving the related reliability and maintainability index is studied. And how to get the relevant parameters of the model through the actual engineering data is analyzed. The main contents of this paper are as follows: (1) the basic maintenance theory is studied. Based on time-varying reliability, a life-cycle maintainability model is established. (2) the maintenance interval and reliability calculation of maintenance model based on time-varying reliability are studied. Using model to analyze the reliability of the system. (3) using MATLAB language to write model related calculation program, using C language to compile model calculation interface, to simulate the relevant data in MATLAB environment, The expected function of the main maintainability parameters of the system is obtained. (4) the technical method of how to determine the main parameters of the model through the actual engineering data is studied, and the feasibility of the method is verified by an example. (5) the benefit degree function is introduced. The reliability index is combined with the economic index to judge the limit technical state of the system and to determine the whole life cycle of the system. (6) the model availability is verified. The maintainability of a certain equipment monitoring system is optimized by using the model, and compared with other models, the advantages and disadvantages of the new model are obtained.
【學位授予單位】：東北大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TH17

【參考文獻】

相關期刊論文 前3條

1 劉軍;馮廣斌;趙亞鋒;;壽命服從指數分布的裝備最佳維修間隔期確定[J];兵工自動化;2007年02期

2 王正;謝里陽;李兵;;考慮失效相關的系統動態可靠性模型[J];兵工學報;2008年08期

3 蔣仁言,杜穎,龔瑞庚;定期預防維修最佳周期的確定[J];長沙交通學院學報;1987年02期

，

本文編號：2281721