【摘要】：離心泵作為一種常見的水力機械,廣泛應用于在給水排水及農業工程、工業工程、航空航天、航海工程和能源工程等領域。葉輪是離心泵的核心部件,它的設計速度和質量直接影響產品的研發周期和市場競爭力。本文在了解國內外的葉輪CAD應用的基礎上,針對當前葉輪CAD的研究和應用現狀的不足,以Pro/E為支撐軟件,以面向?qū)ο蟮腣isual C++6.0編程語言為開發工具,利用二次開發工具包Pro/TOOLKIT,采用三維葉輪模型與程序控制相結合的方式,實現了葉輪的參數化程序設計。本文的研究內容如下： 1.在一元和三元流動的基礎上給出了離心泵及葉輪各參數計算經驗公式,為后來模型參數的設計提供了便利。 2.針對傳統離心泵設計步驟繁瑣的不足,提出了采用4次Bezier曲線來設計葉輪的軸面流線方法,詳細介紹了軸面流線的控制方法繪制了葉片的軸面截線和木模圖。 3.采用NURBS曲線構造了離心泵葉輪葉片流線通用表達式,利用參數化設計原理,制定了離心泵葉輪三維模型自動生成方案,并闡述了基于Pro/TOOLKIT的離心葉輪三維建模的具體實現方法。 4.在VC++編程環境下,利用Pro/TOOLKIT工具包,采用基于模型的方法,對葉輪模型進行開發,實現葉輪的參數化設計 5.利用Pro/E的Mechanism運動學分析模塊,對離心泵葉輪進行運動學分析與仿真,得到并分析了葉輪運動的位置、速度和加速度曲線圖。
[Abstract]:As a common hydraulic machinery, centrifugal pump is widely used in water supply and drainage, agricultural engineering, industrial engineering, aerospace, navigation engineering and energy engineering. Impeller is the core component of centrifugal pump, its design speed and quality directly affect the product R & D cycle and market competitiveness. On the basis of understanding the application of impeller CAD at home and abroad, aiming at the deficiency of the current research and application of impeller CAD, this paper takes Pro/E as the supporting software and the object-oriented Visual C 6.0 programming language as the development tool. The parametric programming of impeller is realized by using Pro/TOOLKIT, which combines 3D impeller model with program control. The research contents of this paper are as follows: 1. On the basis of univariate and three-dimensional flow, the empirical formulas for calculating the parameters of centrifugal pump and impeller are given, which provides convenience for the design of the parameters of the later model. In view of the complicated design procedure of traditional centrifugal pump, the method of designing axial streamline of impeller by 4 times Bezier curve is put forward, and the control method of axial streamline line is introduced in detail. The axial section line and woodblock diagram of blade are drawn in detail. The general expression of flow line of impeller blade of centrifugal pump is constructed by using NURBS curve. Based on the principle of parameterized design, the automatic generation scheme of 3D model of impeller of centrifugal pump is established. The realization method of centrifugal impeller 3D modeling based on Pro/TOOLKIT is described. 4. In VC programming environment, the impeller model is developed by using Pro/TOOLKIT toolkit and model-based method, and the parametric design of impeller is realized. The kinematics analysis and simulation of centrifugal pump impeller are carried out by using Mechanism kinematics analysis module of Pro/E. The position, velocity and acceleration curve of impeller motion are obtained and analyzed.
【學位授予單位】：中南大學
【學位級別】：碩士
【學位授予年份】：2012
【分類號】：TH311

【參考文獻】

相關期刊論文 前10條

1 閆厲;季靜;;基于Bernstein基函數的石油價格預測研究[J];產業與科技論壇;2011年11期

2 錢涵欣;水輪機轉輪葉片加厚及木模圖繪制的計算機輔助設計[J];動力工程;1994年03期

3 駱勇駿;葉邦彥;;基于權因子的三次NURBS曲線推拉方法[J];工程設計學報;2009年06期

4 嚴敬;牛妮;李維承;附杰;;保角變換離心式葉片繪型的新方法[J];蘭州理工大學學報;2008年04期

5 宗望遠;馮澤平;朱松德;;淺談CAD技術的研究與應用[J];湖北農機化;2003年02期

6 趙文生，，羅京翔，范玉青;NURBS方法設計離心葉輪軸面流線[J];航空精密制造技術;1996年06期

7 何希杰,勞學蘇;離心泵葉輪軸面流線分點計算新方法[J];河北工程技術高等專科學校學報;1996年04期

8 吳福忠,柯映林;蜂窩芯零件五坐標加工無干涉建模[J];計算機輔助設計與圖形學學報;2004年04期

9 王曉東;Bezier曲線樹[J];計算機輔助設計與圖形學學報;1994年04期

10 劉珍平,張培仁,梁民;地形圖等高線的計算機矢量化及三維地形模型的生成[J];計算機應用研究;1999年06期

相關碩士學位論文 前4條

1 關金生;離心泵葉輪CAD系統的開發[D];浙江大學;2004年

2 張艷偉;離心泵葉輪CAD系統及三維實體造型研究[D];吉林大學;2005年

3 陳丹;離心葉輪葉片繪型的計算機集成[D];西華大學;2007年

4 朱亮;葉片厚度變化對軸流泵性能的影響[D];揚州大學;2008年

本文編號：2222487