【摘要】：全球經濟一體化格局的加強為制造業的飛躍發展提供了廣闊的平臺,這就要求制造企業進行高質與高效的生產和管理,制造業的迅速發展不僅帶來了企業技術創新的挑戰,對企業生產管理方式也提出了更高的要求。制造業信息化管理水平的高低直接影響著企業的生產效率,是企業綜合實力的象征和市場競爭力水平的標志。 隨著企業生產分工與協作的加強,不同產品制造工藝流程精細化程度逐漸提升,為了滿足個性化產品的需求,以及產品生產成本和生命周期的合理化,單件生產方式越來越受到企業的青睞,同時,在該方式下的企業生產計劃管理與排程等車間生產控制策略也逐漸被生產管理人員所重視。本文以面向ETO生產模式的企業為模型,采用單件生產方式為研究背景,通過建立企業生產計劃模型、加工車間生產排程模型與算法求解以及開發相關軟件信息系統,旨在提高企業的生產控制管理水平,課題的展開包括以下幾個方面內容： 一、在總結企業模型相關理論知識的基礎上,結合課題研究背景,采用面向?qū)ο蟮姆椒ń⑵髽I(yè)模型；同時,對該模型的實現所需的功能和技術進行詳細分析。 二、闡述生產計劃管理理論研究成果,基于企業實際生產管理現狀,提出企業生產計劃管理中存在的問題,為解決這一瓶頸,建立面向單件生產企業的生產計劃管理模型。 三、概述生產排程相關理論知識和常規典型求解算法,構建滿足企業運作和計劃管理方式的加工車間生產排程模型,建立模型的算法流程；算法的求解是加工車間有向圖的數學規劃法與基于規則方法的應用結合,求解的目標是得到最小化制造期Cmax,并最終通過實際生產數據進行算法可行性證明。 四、開發基于上述相關理論研究成果的生產計劃與排程管理的信息系統,使得企業的生產、監控與管理業務一體化,提升制造企業的信息化管理水平。
[Abstract]:The strengthening of global economic integration provides a broad platform for the rapid development of manufacturing industry, which requires manufacturing enterprises to carry out high quality and efficient production and management. The rapid development of manufacturing industry not only brings the challenge of enterprise technological innovation. To the enterprise production management mode also proposed the higher request. The level of information management of manufacturing industry directly affects the production efficiency of enterprises and is the symbol of the comprehensive strength of enterprises and the symbol of the level of market competitiveness. With the strengthening of the division of labor and cooperation in the production of enterprises, the degree of refinement of the manufacturing process of different products is gradually enhanced, in order to meet the needs of personalized products, as well as the rationalization of product production cost and life cycle, The single-piece production method is more and more popular in enterprises, at the same time, the production planning management and scheduling of workshop production control strategies are gradually paid attention to by production managers. In this paper, the enterprise oriented to ETO production model is taken as the model, and the single-piece production mode is adopted as the research background. Through the establishment of the enterprise production planning model, the solution of the production scheduling model and algorithm in the processing workshop and the development of the related software information system, In order to improve the level of production control and management of enterprises, the development of the project includes the following aspects: first, on the basis of summarizing the relevant theoretical knowledge of the enterprise model, combined with the research background of the project, At the same time, the function and technology needed for the implementation of the model are analyzed in detail. Secondly, the research results of production planning management theory are expounded. Based on the actual production management situation of enterprises, the problems existing in production planning management are put forward. In order to solve this bottleneck, a production planning management model for single-piece production enterprises is established. Thirdly, it summarizes the theoretical knowledge of production scheduling and general typical algorithms, constructs the production scheduling model of the processing workshop that meets the enterprise operation and plan management, and establishes the algorithm flow of the model. The solution of the algorithm is a combination of the mathematical programming method of the directed graph of the workshop and the application of the rule-based method. The goal of the solution is to obtain the minimum manufacturing period Cmax, and finally prove the feasibility of the algorithm through the actual production data. Fourth, the development of production planning and scheduling management information system based on the above related theoretical research results, so as to integrate the production, monitoring and management business of enterprises, and improve the level of information management of manufacturing enterprises.
【學位授予單位】：南昌大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TH186

【相似文獻】

相關期刊論文 前10條

1 戰德臣，葉丹，徐曉飛，，李全龍;動態聯盟企業模型[J];計算機集成制造系統-CIMS;1999年03期

2 李林,王懷伯,張申生;企業模型及建模理論與方法及其相關研究[J];中國機械工程;2002年07期

3 高聰駿;;建設具有中國特色的機械行業ERP[J];微型機與應用;2006年06期

4 宋利康;周儒榮;張莉;;基于過程建模的ERP自動配置方法[J];機械科學與技術;2007年09期

5 李剛,孫林巖,李海泉;敏捷企業建�？蚣苎芯縖J];中國機械工程;2003年21期

6 趙曾貽;企業過程建模中通用模塊的研究[J];工業工程與管理;2003年06期

7 張金,付國良,李霞;基于模型構件的動態企業建模研究[J];機電工程;2004年04期

8 王志英,葛世倫;基于J2EE/UML的ERP動態建模研究[J];陜西理工學院學報(自然科學版);2005年04期

9 何霆,戰德臣,徐曉飛,王平;新一代ERP系統功能構件標準化問題研究[J];計算機集成制造系統-CIMS;2004年S1期

10 黑秀玲;代逸生;;基于情景演算的企業生產管理過程建模[J];中國制造業信息化;2006年15期

相關會議論文 前10條

1 蔡U

本文編號：2214081