本文選題：變量控制 + 數字泵�。� 參考：《浙江大學》2011年碩士論文

【摘要】：本課題研究的對象是軸向柱塞泵的變量控制方法與特性。在對一些常見的機液式變量控制研究的基礎上,提出基于PWM高速開關閥軸向柱塞泵數字式變量控制。課題搭建了機液式壓力控制泵、機液式壓力流量復合控制泵、機液式壓力流量功率復合控制泵及大排量閉式軸向柱塞泵的仿真模型,并對它們進行了仿真分析。在此基礎上,課題進一步搭建了數字式軸向柱塞泵(本論文簡稱數字泵)的聯合仿真模型,仿真與試驗結合,實現并驗證數字泵的壓力控制、壓力流量復合控制及壓力流量功率復合控制三種控制功能。 本課題首次采用LabVIEW與AMESim建立數字泵的聯合仿真模型,并在此模型基礎上對數字泵壓力控制、壓力流量復合控制及壓力流量功率復合控制三種控制形式的靜態性能進行了仿真分析。同時,也對數字泵三種控制形式下的壓力控制、流量控制、功率控制的動態性能進行了仿真分析。最后,通過數字泵的靜態性能試驗對數字泵的壓力控制功能、壓力流量復合控制功能及壓力流量功率復合控制功能進行了驗證。 本論文的主要內容如下： 第一章,介紹了軸向柱塞泵變量控制概況及研究現狀。通過調研了國內外關于變量控制的研究成果,確定了本課題的研究思路及內容,指出了本課題的研究難點。 第二章,詳細介紹了幾種常見變量控制泵的工作原理、靜動態性能。并在此基礎上建立它們的仿真模型,最終針對這幾種變量控制的靜態或動態性能進行了仿真分析。 第三章,首先闡述數字泵三種控制形式與機液式壓力控制泵、壓力流量復合控制泵及壓力流量功率復合控制泵的聯系。在此基礎上將數字泵分成幾部分進行建模。主要有高速開關閥的建模、三種控制形式的三個控制模塊的建模。最后介紹數字泵聯合仿真模型的建立。 第四章,對數字泵壓力控制、壓力流量復合控制及壓力流量功率復合控制靜動態性能進行仿真和分析。 第五章,介紹了數字泵試驗系統的原理,對數字泵壓力控制、壓力流量復合控制及壓力流量功率復合控制的靜態性能進行了試驗驗證。 第六章,總結了論文的主要研究內容,指出了下一步的研究方向。
[Abstract]:The object of this thesis is variable control method and characteristic of axial piston pump. Based on the research of some common variable control methods, digital variable control of axial piston pump based on PWM high speed switch valve is proposed. The simulation models of mechanical hydraulic pressure control pump, mechanical liquid pressure flow compound control pump, mechanical hydraulic pressure flow power compound control pump and large displacement closed axial piston pump are built and analyzed. On the basis of this, the paper further builds the joint simulation model of digital axial piston pump (this paper is referred to as digital pump), and combines simulation with experiment to realize and verify the pressure control of digital pump. There are three control functions: pressure flow combined control and pressure flow power compound control. For the first time, LabVIEW and AMESim are used to establish the joint simulation model of digital pump, and on the basis of this model, the pressure of digital pump is controlled. The static performance of three control forms, pressure flow control and pressure flow power composite control, is simulated and analyzed. At the same time, the dynamic performance of pressure control, flow control and power control are simulated and analyzed. Finally, through the static performance test of digital pump, the functions of pressure control, pressure flow compound control and pressure flow power compound control are verified. The main contents of this paper are as follows: in Chapter 1, the variable control of axial piston pump is introduced. The research results of variable control at home and abroad are investigated, the research ideas and contents of this subject are determined, and the research difficulties are pointed out. In the second chapter, the working principle and static and dynamic performance of several common variable control pumps are introduced in detail. Finally, the static or dynamic performance of these variables is simulated and analyzed. In the third chapter, the relationship between the three control forms of digital pump and the hydraulic pressure control pump, the pressure flow compound control pump and the pressure flow power compound control pump is introduced. On this basis, the digital pump is divided into several parts to model. There are three models of high-speed on-off valve and three control modules. Finally, the establishment of digital pump joint simulation model is introduced. In chapter 4, the static and dynamic performance of digital pump pressure control, pressure flow compound control and pressure flow power compound control are simulated and analyzed. In chapter 5, the principle of digital pump test system is introduced, and the static performance of digital pump pressure control, pressure flow compound control and pressure flow power compound control are tested and verified. The sixth chapter summarizes the main research contents and points out the next research direction.
【學位授予單位】：浙江大學
【學位級別】：碩士
【學位授予年份】：2011
【分類號】：TH322

【參考文獻】

相關期刊論文 前10條

1 郭初生,王向周,王渝;變轉速軸向柱塞泵恒流量控制的建模與仿真[J];北京理工大學學報;2004年11期

2 楊威,那焱青,尹文波,那成烈;數字式軸向柱塞泵[J];甘肅工業大學學報;2003年01期

3 王俊峰;宋文愛;劉哲;;基于LabVIEW的信號處理虛擬實驗系統[J];國外電子測量技術;2006年10期

4 王會義，韓宏博，，王廣懷，張友旺，吳沛容;液壓高速開關閥位置控制系統在泵／馬達上的應用研究[J];哈爾濱工業大學學報;1996年02期

5 林銳,胡俐娟,明仁雄,方健家;PWM高速開關閥的研制與應用[J];閥門;2004年06期

6 張志義,孫蓓,黃元峰;高速開關閥位置控制方法[J];機床與液壓;2005年05期

7 張廷羽;張國賢;;高速開關電磁閥的性能分析及優化研究[J];機床與液壓;2006年09期

8 劉少軍,朱梅生;基于PWM高速開關閥的液壓位置系統最優控制研究[J];機床與液壓;2000年02期

9 劉忠,楊襄璧,伍勁松,張新;恒壓變量泵系統的電液數字控制研究[J];機床與液壓;2001年02期

10 施光林,鐘廷修;高速電磁開關閥的研究與應用[J];機床與液壓;2001年02期

相關碩士學位論文 前5條

1 徐中光;軸向變量柱塞泵壓力特性研究[D];西南交通大學;2007年

2 黃鳴輝;軸向變量柱塞泵閉環控制特性研究[D];西南交通大學;2007年

3 林銳;高速開關閥的研究及數字仿真[D];武漢理工大學;2005年

4 溫超;基于通用比例壓力閥的電液比例恒壓變量柱塞泵控制特性研究[D];蘭州理工大學;2005年

5 王慶瑋;單片機控制數字變量柱塞泵的研究[D];沈陽工業大學;2005年

本文編號：2058123