本文選題：負半徑類 + 擺動推桿�。� 參考：《集美大學》2014年碩士論文

【摘要】：本學位論文的研究對象是負半徑類擺動推桿盤形凸輪機構。由于凸輪與推桿呈凸、凹廓面接觸，顯著增加了綜合曲率半徑，降低了接觸應力且更易于形成潤滑油膜，，故其在承載能力、接觸強度、減摩耐磨性能、機械效率和使用持久性等方面，皆具有非常顯著、大幅度的提高。 本文研究分析了負半徑類擺動推桿盤形凸輪機構尺度綜合須滿足的四項約束條件——運動連通性條件、傳動性能條件、運動保真條件和接觸強度條件，并基于四項約束條件建立了對象機構尺度綜合的具體、定量化參數表示。以特定的機構構型和基本尺寸為例，開展并完成了如下工作： （1）全面系統地介紹了負半徑類擺動推桿盤形凸輪機構構型，研究分析了運動連通性條件、傳動性能條件、運動保真條件和接觸強度條件各自對負半徑類擺動推桿盤形凸輪機構尺度的約束和影響，推導得到了各約束條件相應的表達式。 （2）基于各約束條件，探索解決運動連通性條件、傳動性能條件、運動保真條件和接觸強度條件等單純和組合問題的合理有效途徑，給出各種構形機構的最優設計思路，綜合出滿足諸設計約束、結構緊湊（尺寸最優）的凸輪機構。 （3）基于分析綜合，開發出同時考慮四項約束條件的負半徑類擺動推桿盤形凸輪機構尺度綜合系統軟件。 通過對負半徑類擺動推桿盤形凸輪機構尺度綜合的分析研究，結合軟件得到了負半徑類擺動推桿盤形凸輪機構尺度的特點以及各約束條件對其的影響，探索并闡明了各約束條件在負半徑類擺動推桿盤形凸輪機構尺度綜合過程中相互間的耦合制約關系。
[Abstract]:The research object of this dissertation is negative radius type oscillating push rod disc cam mechanism. Because the cam has convex and concave profile contact with the push rod, the comprehensive radius of curvature is increased significantly, the contact stress is reduced and the lubricating oil film is formed more easily, so it has the bearing capacity, the contact strength and the friction reduction and wear resistance. Mechanical efficiency and use persistence, and so on, has the very remarkable, the big enhancement. In this paper, four constraint conditions which must be satisfied in the scale synthesis of negative radius type oscillating push rod disc cam mechanism are studied and analyzed, such as motion connectivity condition, transmission performance condition, motion fidelity condition and contact strength condition. Based on the four constraints, the concrete and quantitative parameter representation of the object mechanism scale synthesis is established. Taking the specific mechanism configuration and basic size as an example, the following works are carried out and completed: (1) the configuration of the negative radius type oscillating push rod disk cam mechanism is introduced comprehensively and systematically, and the conditions of motion connectivity are studied and analyzed. The constraint and influence of transmission performance condition, motion fidelity condition and contact strength condition on the size of the negative radius type swinging push rod disc cam mechanism are derived, and the corresponding expressions of each constraint condition are derived. The reasonable and effective ways to solve the simple and combined problems such as the condition of motion connectivity, the condition of transmission performance, the condition of motion fidelity and the condition of contact strength are explored. The optimal design ideas of various configuration mechanisms are given, and the design constraints are synthetically satisfied. Based on the analysis and synthesis, a scale synthesis software of negative radius type oscillating push rod disk cam mechanism is developed based on the analysis and synthesis of compact (optimal size) cam mechanism. Based on the analysis and study of the scale synthesis of the negative radius type swinging push rod disk cam mechanism, the characteristics of the negative radius type swing push rod disk cam mechanism and the influence of the constraint conditions on the mechanism scale are obtained by combining the software. In this paper, the coupling and restriction relations between the constraint conditions in the scale synthesis process of the negative radius type swing push rod disc cam mechanism are explored and clarified.
【學位授予單位】：集美大學
【學位級別】：碩士
【學位授予年份】：2014
【分類號】：TH112.2

【參考文獻】

相關期刊論文 前10條

1 楊芙蓮，葛正浩，彭國勛;間歇分度凸輪機構傳動裝置CAD應用軟件的研究與開發[J];大連輕工業學院學報;1995年03期

2 常勇;吳從p

本文編號：2023559