本文選題：溫升 + 承載量系數-偏心率函數　； 參考：《機床與液壓》2016年09期

【摘要】：MK84250高速軋輥磨床主軸所用液體動靜壓軸承是決定加工質量和效率的關鍵部件,其溫升是影響軸承的正常工作的關鍵因素。但由于其油膜包角及油膜壓力的求解域未知,無現成資料可查,通過數值計算方法擬合了未知包角的承載量系數-偏心率函數曲線,分析了軸承結構并求解了線速度為45 m/s和60 m/s時的流量,并對溫升進行了計算。計算結果與實際情況一致。
[Abstract]:The liquid hydrostatic bearing used in the spindle of MK84250 high speed roller grinder is the key component to determine the machining quality and efficiency, and the temperature rise is the key factor affecting the normal operation of the bearing. However, because the solution domain of oil film angle and oil film pressure is unknown, there is no ready-made data to check, and the load carrying coefficient-eccentricity function curve of unknown envelope angle is fitted by numerical calculation method. The structure of the bearing is analyzed and the flow rate of 45 m / s and 60 m / s is calculated and the temperature rise is calculated. The calculated results are in agreement with the actual situation.
【作者單位】： 貴州大學機械工程學院;
【基金】：貴州省科技重大專項(黔科合重大專項字(2011)6017) 貴州大學研究生創新基金資助項目(研理工2013026)
【分類號】：TH133.3;TG595.4

【相似文獻】

相關期刊論文 前3條

1 王鵬飛;張殿華;劉佳偉;王軍生;;變包角板形測量值計算模型[J];鋼鐵研究學報;2010年01期

2 張勝男,蒙延芬,王國宏;油石包角與溝道表面質量的關系[J];軸承;2000年08期

3 ;[J];;年期

，

本文編號：1973201