本文選題：制造裝備 + 嵌入式監控維護　； 參考：《南京理工大學》2011年碩士論文

【摘要】：隨著我國大力發展制造裝備行業,企業對制造裝備的遠程分布式監控與維護的需求日益增多。在這樣的背景下,本文重點研究設計一款滿足制造裝備監控需求的嵌入式監控與維護單元原型。 本文在對嵌入式監控與維護單元需求分析基礎上,論證并設計了單元原型系統的總體方案；針對以太網通信的擁塞控制問題,提出了一種根據網絡擁塞狀況動態調整擁塞窗口的優化方法,并對改進后的擁塞控制進行網絡仿真；探討了在STM32硬件平臺上移植μc/os-Ⅱ嵌入式操作系統的問題,完成了LwIP以太網協議棧的移植優化工作,實現了嵌入式監控與維護單元的以太網通信功能；進行原型系統的硬軟件詳細設計,包括電源系統、主控制器、數據存儲器、調試接口、以太網通信接口、USB接口、CAN、485總線接口等模塊硬件設計以及USB通信、CAN總線通信、RS485總線通信和嵌入式Web服務器實現等模塊軟件設計。 基于本文研究設計開發的嵌入式監控與維護單元原型在重型裝備液壓機生產線上進行初步應用,應用表明設計達到了預期目標,對實際的工程應用具有一定的參考價值。
[Abstract]:With the development of manufacturing equipment industry in China, the demand for remote distributed monitoring and maintenance of manufacturing equipment is increasing day by day. In this context, this paper focuses on the design of an embedded monitoring and maintenance unit prototype to meet the monitoring requirements of manufacturing equipment. Based on the requirement analysis of embedded monitoring and maintenance unit, this paper demonstrates and designs the overall scheme of the unit prototype system, aiming at the congestion control problem of Ethernet communication. This paper presents an optimized method to dynamically adjust congestion window according to network congestion condition, and simulates the improved congestion control, and discusses the problem of transplanting 渭 cr / os- 鈪，

本文編號：1816695